Bedienungsanleitung Behringer X32 Producer (Seite 11 von 74) (Englisch)

660493

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

11 X32 PRODUCER DIGITAL MIXER User Manual

iPad App for X32 PRODUCER

Many functions of the X32 PRODUCER console can be remotely controlled by

a dedicated iPad app. Details about the app’s download, setup and operation

are included in a separate user manual available for download from the

X32 PRODUCER product page.

The app’s User Interface is optimized for the touchscreen nature of the iPad

device and provides many useful remote features of the console. Using the app,

you can perform functions such as adjusting monitor mixes from the stage

while interacting with musicians, or adjusting the front-of-house mix from the

audience, while hearing the mix exactly as the audience does.

Windows-based application and Linux/OS X application

for X32 PRODUCER

Also oered is a separate remote editor running onhost computers that will

allow for complete editing control of the X32 PRODUCER via Ethernet. Details of

the remote editor’s download, setup and operation are included in a separate

user manual available for download from the X32 PRODUCER product page.

Check out behringer.com for more information.

Tip: The X32 PRODUCER remote communication is OSC-based (open sound

control) and we will share the protocol on our website, allowing developers to

design their own control software. Stay tuned to behringer.com for details on the

OSC protocol.

X-USB card

The X-USB card allows transmission of up to 32channels to and from a connected

computer. Pleasedownload the X-USB drivers and Quick Start Guide from

behringer.com before connecting the mixer to your computer.

Startup and Shutdown, and Update:

We recommend switching the X32 PRODUCER mixer on rst, andshutting it o

last when any sound system is connected. This will prevent the possibility of any

unexpected noises being transmitted during the startup/shutdown process.

The Setup screen’s general preference page contains a Safe Main Levels

function. When activated, theconsole automatically mutes the main LRC levels

when booting the console. It also prevents any scene loading from aecting

(i.e. turning up) themainslevels.

Synchronization and Sample Rate settings for the console can be adjusted on

the Setup/Cong page, but please note that sample rate changes will require a

reboot of the console. When you see a red square indication at the top section of

the main display, please verify if the synchronization settings on Setup/Cong

make sense (see section 3).

If the console has been used by someone else, andyou feel unsure about its

specic routing status, you can reset the X32 PRODUCER to default settings in two

convenient ways:

• While the console is booting and the “X32” logoappears on the screen,

press and hold the Scenes/Undo button until the console is fully operational

and the Home screen is displayed. Theconsole will now be in the same state

as it was when shipped from the factory. However, youcan immediately

revert to the status the console was in when being switched o the last time

by pressing the Scenes/Undo button

• You can also reset the console any time after booting by pressing

Setup/Cong, then Initialize

NOTE: Initializing the console does not automatically erase the current show data

or any stored scenes. Ifyou wish to clear all scenes, please use the ‘Initialize All

Show Data’ option on Setup/Congpage.

In order to prevent any errors by losing power during a store operation,

we recommend using the “SafeShutdown” function from the Setup/Globalpage.

NOTE: The X32 PRODUCER can be locked against unintended use by activating

’Lock Console’ from the Setup/Global page. In this state the UI will not allow any

changes to be made and the display shows “X”. Keep HOME depressed for about

5s to unlock the X32 again.

The X32 rmware can easily be updated by performing the following steps:

• Download the new console rmware from the X32 PRODUCERproduct page

onto the root level of a USB thumb drive

• Plug the USB thumb drive into the top panel USB connector while the

console is turned o

• Hold the USB View button depressed while switching the console on.

While booting, theX32 PRODUCER willrun a fully automatic rmware

update, whichwill take 2-3 minutes longer than the regular boot sequence

When no update le is available on the USB drive, orwhen it is corrupted,

the update mode will remain active, preventing the X32 from booting regularly.

Switch the console o and back on without holding the USB View button to boot

the console with the existing rmware.

CAUTION: Please do not block the vent openings of the X32 PRODUCER cabinet!

Specically when mounting the X32 PRODUCER in a road case, please ensure

there is sucient space to allow for some airow.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 Producer Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 Producer

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info