Bedienungsanleitung Behringer X32 Rack (Seite 31 von 64) (Englisch)

660494

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

31 X32 RACK DIGITAL MIXER User Manual

7. Main Display

7.1 Overview

7.1.1 Display and Navigation Controls

The controls in this section are used in conjunction with the color screen, in order

to navigate and control the graphical elements it contains.

By including dedicated rotary controllers that correspond to adjacent controls on

the screen, as well as including cursor buttons, the user can quickly navigate and

control all of the color screen’s elements.

Color Screen: This color screen contains various displays that give visual

feedback for the operation of the console, and also allow the user to make various

adjustments not provided for by the dedicated hardware controls.

Rotary Encoders: These six rotary encoders are used to adjust various color

screen elements located directly above them. Each of the six rotary encoders

can be pushed inward to activate a button press function. This function is useful

when controlling color screen elements that have a dual “on/o” type state that

is best controlled by a button, as opposed to a variable state that is best adjusted

by a rotary control.

Screen selection buttons: These 10 illuminated buttons allow the user to

immediately navigate to any of 10 master screens that address dierent sections

of the console. The 10 sections that can be navigated to with these buttons are:

1. Home

2. Meters

3. Routing

4. Library

5. Eects

6. Setup

7. Monitor

8. Scenes

9. Mute Group

10. Utility

Page Select Buttons: These two buttons allow for left-right navigation among

the dierent “pages” contained within a screen set. A graphical tab display shows

which page you are currently on.

Layer Up/Down Buttons: On some screens, there are more parameters present

than can be adjusted by the 6 encoders underneath. In these cases, use the layer

up/down buttons to navigate through any additional layers contained on the

screen page.

L/R Meter: This dual 24-segment meter displays the audio signal level output

from the main bus of the console.

M/C SOLO Meter: This 24-segment meter displays the audio signal level

output from the mono bus of the console. When one or more channels are

currently soloed, the meter switches to displaying the level of the currently

soloed signal(s).

7.1.2 Console Screens

The color screen of the X32 RACK oers a wealth of visual feedback and hands

on control for the console. Whereas the dedicated front panel controls oer

immediate hands-on adjustments for the most important operations of a

channel, the color screens oer similarly immediate visual feedback for a selected

channel, as well as more global areas of the console.

The screens are divided into three main areas:

1. Global Screen Elements

2. Main Display

3. Rotary Encoder Elements

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 Rack Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info