Bedienungsanleitung Behringer X32 Rack (Seite 39 von 64) (Englisch)

660494

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

39 X32 RACK DIGITAL MIXER User Manual

7.4 Routing Screen

The routing screen is where all signal patching is done, allowing you to route

internal signal paths to and from the physical input/output connectors located on

the console’s rear panel.

The routing screen contains the following separate tabs:

1. Home: Allows patching of physical inputs to the 16 input channels and

Auxinputs of the console.

2. Analog Out: Allows patching of internal signal paths to the console’s

8 rear-panel XLR outputs.

3. Aux Out: Allows patching of internal signal paths to the console’s

6 rear-panel ¼"/RCA auxiliary outputs.

4. P16 Out: Allows patching of internal signal paths to the 16 outputs of the

console’s 16-channel P16 Ultranet output.

5. Card Out: Allows patching of internal signal paths to the 32 outputs of the

X-USB card.

6. AES50-A: Allows patching of internal signal paths to the 48 outputs of the

rear panel AES50-A output.

7. AES50-B: Allows patching of internal signal paths to the 48 outputs of the

rear panel AES50-B output.

None of the routing screen’s tabs contains a secondary level of encoder functions.

When routing audio, the Layer up/down keys do not need to be used.

7.4 .1 Routing Screen: Home Tab

The routing screen’s home tab allows the user to patch the console’s physical

rear-panel inputs to the 16 input channels and Aux inputs of the console.

As a default, the console maps the console’s 16 rear-panel analog inputs to their

the respective 16 channel inputs that are accessed on input fader layers one

and two, and maps the rear panel line-level (auxiliary) inputs to the third input

faderlayer.

However, the home tab of the routing screen can be used to change this

default assignment and “crosspatch” dierent physical inputs to dierent

channel inputs, in banks of 8 channels at a time. This allows the user to create a

custom layout of channel inputs that diers from the order that the sources are

plugged into the rear panel, and is easier than physically re-patching physical

audiocables.

To assign various inputs to the console’s input channels, perform the

followingsteps:

1. Adjust the rst rotary encoder to select which 8-channel audio input

source feeds input channels 1-8 of the console. As the encoder is rotated,

thecurrently selected input will be highlighted in the vertical list of choices.

2. When the desired 8-channel source is selected, push the 1st encoder to

“connect” the currently selected 8-channel source. The selected source now

feeds input channels 1-8 of the console.

3. Input choices that can be assigned include:

• Local 1-8

• Local 9-16

• AES50-A 1-8

• AES50-A 9-16

• AES50-A 17-24

• AES50-A 25-32

• AES50-A 33-40

• AES50-A 41-48

• AES50-B 1-8

• AES50-B 9-16

• AES50-B 17-24

• AES50-B 25-32

• AES50-B 33-40

• AES50-B 41-48

• Card 1-8

• Card 9-16

• Card 17-24

• Card 25-32

4. To assign an 8-channel source for the other input channels of the console

(9-16, 17-24, 25-32), simply repeat the process above, usingthe other four

rotary encoders on the same screen.

5. Choices for Aux In 1-4 include:

• Aux 1-4

• Local 1-4

• AES50-A 1-4

• AES50-B 1-4

• Card 1-4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 Rack Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info