Bedienungsanleitung Behringer X32 Rack (Seite 44 von 64) (Englisch)

660494

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

44 X32 RACK DIGITAL MIXER User Manual

7. 5 Libraries Screen

The libraries screen allows loading and saving of commonly used setups for the

channel inputs, eects processors, and routing scenarios.

The libraries screen contains the following separate tabs:

1. Channel: This tab allows the user to load and save commonly used

combinations of the channel DSP eects.

2. Eects: This tab allows the user to load and save commonly used eects

processor presets.

3. Routing: This tab allows the user to load and save commonly used signal

routings they have set up.

7.5.1 Libraries Screen: Channel Tab

The library screen’s channel tab allows you to load and save commonly used

combinations of the channel DSP eects. For example, once you have dialed in

a combination of equalization and compression that works well for a particular

singer, you can save the channel DSP chain as a preset for later recall.

To adjust the various settings on the channel tab, perform the following steps:

1. Adjust the 1st encoder to navigate among which specic elements of

the input channel can be recalled when loading an input channel preset.

Choicesinclude:

• Head Amp (Microphone Preamplier)

• Conguration

• Gate

• Compressor

• Equalizer

• Sends

2. Tap the 1st encoder to turn the currently selected element on/o in the

recalllist.

3. Adjust the 2nd encoder to scroll among a list of input channel presets.

4. Tap the 2nd encoder to load the currently highlighted preset and make it

active on the currently selected console channel.

5. Adjust the 3rd encoder to scroll among a list of channel preset slots to save

the current state of the currently selected console channel.

6. Tap the 3rd encoder to save the currently selected channel’s state, to the

currently selected preset slot.

• When the 3rd encoder is tapped, a preset naming screen appears.

Adjustand tap encoders 4-6 to apply a custom name to the preset

before saving it, then tap the 6th encoder to complete the save process.

7. Tap the 4th encoder to delete a preset from the currently highlighted

presetslot.

8. Tap the 5th encoder to import a preset from an attached USB drive.

• When the 5th encoder is tapped, an “import preset from USB”

screenappears. Adjust the 1st encoder to navigate among the contents

of the USB drive, and then tap the 1st encoder to select the currently

highlighted preset folder.

• When the preset le has been imported, tap the 2nd encoder to leave

the screen.

9. Tap the 6th encoder to export the currently highlighted preset to an

attached USB drive.

• When the 6th encoder is tapped, an “Export Preset to

USBdriveappears”.

• Adjust the 1st encoder to scroll among the currently available

presets to export, then tap the rst encoder to select the currently

highlightedpreset.

• Adjust and tap encoders 4-6 to apply a custom name to the preset as it

is exported.

• Tap the 2nd encoder to cancel out of the export operation.

7.5.2 Libraries Screen: Eects Tab

The library screen’s eects tab allows you to load and save presets for the various

onboard eects processors.

To adjust the various settings on the FX tab, perform the following steps:

1. Adjust the 1st encoder to navigate among which of the eight eects slots to

load or save a preset.

• As you navigate among the eight eects slots, the specic eect

processor loaded into each slot will display on the screen as both a name

and icon.

2. To save and load presets, as well as import/export them, follow the same

procedures as detailed in the Libraries Screen: Channel Tab

7.5.3 Libraries Screen: Routing Tab

The library screen’s routing tab allows you to load and save presets of the

console’s signal routings. This can be useful for repeating specic routing

scenarios that occur over and over on a regular basis, such as when using the

console for a weekly club gig or worship service.

To adjust the various settings on the routing tab, perform the following steps:

1. Adjust the 1st encoder to navigate among which specic console signal paths

will be recalled when loading a routing preset. Choices include:

• Channel Inputs

• Analog Out

• Auxiliary Out

• P16 (Ultranet) Out

• Card Out

• AES50 Out

2. Tap the 1st encoder to turn the currently selected element on/o in the

recalllist.

3. To save and load presets, as well as import/export them, follow the same

procedures as detailed in the Libraries Screen: Channel Tab.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 Rack Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info