Bedienungsanleitung Behringer XAir - X18 (Seite 11 von 25) (Deutsch, Englisch, Französisch, Portugiesisch, Spanisch)

660500

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

(EN) Step 3: Network

Connection

DIGITAL iPAD/TABLET MIXER X18/XR18 Network Connection

Network Connection

The X AIR mixers eliminate all hassles by

incorporating a wireless network router that

gives access to the mixer in three di erent

ways–via Ethernet LAN, or wirelessly as a

Wi Client or as an Access Point. Selection is

made with the REMOTE switch [12]. Youmay

view or change the network preferences

for these on any of the X AIR remote control

applications on the ’Setup/Network’ page.

IP Address and DHCP

Depending on the connection scenario, the

X(R)18 o ers up to 3 options for connecting

a tablet or PC for software control – DHCP

Client, DHCP Server, and xed IP operation.

Connection is achieved di erently

depending on which option you choose:

DHCP Client mode is available in Ethernet

LAN or Wi Client operation. The mixer will

automatically request an IP lease from the

DHCP server that owns the IP addresses

in the network to which you are trying

toconnect.

DHCP Server (DHCPS) is optionally available

for Ethernet LAN connections and is standard

in Access Point operation. Themixer will

own the IP addresses and provide IP leases

to devices requesting access to that network.

The mixer will always use IPaddress

192.168.1.1 and assign IP addresses

192.168.1.101 – 192.168.1.132 to its clients.

Static IP is available for Ethernet LAN and

Wi Client operation. The mixer will use the

 xed (static) IP address, subnet mask and

gateway that you specify for registering on

the network. Make sure that the addresses

you specify manually are not con icting with

any other addresses on the same network.

Wegenerally recommend using the DHCP

mode, unless you have a very speci c reason

to set itupmanually.

Note: Changing parameters of the currently

selected connection mode will disconnect

the software from the console. If the

console is erroneously con gured for a

 xed IP address that is incompatible with

the network it is connected to, the console

will be inaccessible. In this case, one of the

other two connection modes can be used

to regain access and amend the settings.

Ifthat does not work, holdthe Reset

button for 2 seconds to return to default

networksettings.

Mixer name and Ethernet setup screen

Ethernet/LAN

This mode supports DHCP Client (default),

DHCPServer, and  xed IP operation.

Note that if the X(R)18 is connected

to a network where no DHCP server

is present, themixer will generate an

automatic IP address (range169.254.1.0–

169.254.254.255). There are no security

options for LAN connections, so any device in

that network may take control of connected

X(R)18 consoles. Whenconnecting via

LAN/Ethernet to a Wi router, makesure

the security settings of that router prevent

unauthorized access.

Wi Client setup screen

Wi Client

This mode supports DHCP Client (default)

and  xed IP operation. The X(R)18 can

support WEP, WPA and WPA2 security

mechanisms in Wi Client mode and works

on Wi channels 1-11.

Correct SSID (network name) and password

need to be supplied to connect to an

existing network. WEPpasswords have

to be either 5 characters or 13characters

long. If the supplied SSID and password are

incorrect, the mixer cannot be accessed.

Inthis case the networking parameters

have to be reset and another connection

mode has to be used to regain access.

The Ethernet connection mode may be used

for con guration of the Wi Client mode.

While being connected in Ethernet mode,

the X AIR mixer can scan the available

wireless networks and display their SSID

network names,  eld strength and security

method. By selecting the preferred wireless

network, this information can be copied

to the applications’ Wi Client setup page

automatically. You will then be prompted

to  ll in the security password of that

network. Afterswitching from Ethernet

to Wi Client mode, themixer should

connect to the selected wireless network

automatically, and will be displayed

by remote applications on any device

connected to the samenetwork.

Access Point setup screen

Access Point

This mode only supports DHCP Server

operation with a maximum of 4 clients,

working on Wi channels 1-11. Securityis

supported via WEP 40-bit (5 ASCII

characters) or WEP 104-bit (13 ASCII

characters). By default, the mixer will use

a network name consisting of the model

name plus the last bits of the mixer’s

unique MAC address (e.g. XR18-17-BE-C0).

The default IP address is 192.168.1.1 and no

security is engaged.

The control software is available for

Android and iPad tablets as well as PC/

Mac/Linux computers. Visitbehringer.com

to download the PC/Mac/Linux software.

Thetablet software can be downloaded

from the app store on your device.

To learn more about operating the

control software, visitthe product page

on behringer.com to download the

fullmanual.

20 X AIR X18/XR18 21 Quick Start Guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer XAir - X18 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer XAir - X18

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info