Bedienungsanleitung Behringer Xenyx 1002 (Seite 4 von 12) (Englisch)

496330

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

4 XENYX 1202/1002/802/502 User Manual

1. Introduction

XENYX Mic Preamps

The microphone channels feature high-end XENYX Mic Preamps that

compare well with costly outboard preamps in terms of sound quality

and dynamics and boast the following features:

• 130 dB dynamic range for an incredible amount of headroom

• A bandwidth ranging from below 10 Hz to over 200 kHz for crystal-clear

reproduction of even the nest nuances

• The extremely low-noise and distortion-free circuitry guarantees absolutely

natural and transparent signal reproduction

• They are perfectly matched to every conceivable microphone with up to

60dB gain and +48 volt phantom power supply

• They enable you to use the greatly extended dynamic range of your

24-bit/192-kHz HD recorder to the full, thereby maintaining optimal

audioquality

“British EQ”

The equalizers used for the XENYX Series are based on the legendary circuitry of

top-notch consoles made in Britain, which are renowned throughout the world

for their incredibly warm and musical sound character. Even with extreme gain

settings these equalizers ensure outstanding audio properties.

 Caution!

◊ We should like to draw your attention to the fact that extreme volumes

may damage your hearing and/or your headphones or loudspeakers.

Turn the MAIN MIX control and PHONES control in the main section fully

counter-clockwise before you switch on the unit. Always be careful to

set appropriate volume levels.

Important notes concerning installation

◊ The sound quality may diminish within the range of powerful

broadcasting stations and high-frequency sources. Increase the

distance between the transmitter and the device and use shielded

cables for all connections.

1.1 General mixing console functions

A mixing console fulls three main functions:

• Signal processing: Preamplication, level adjustment, mixing of eects,

frequency equalization

• Signal distribution: Summing of signals to the aux sends for eects

processing and monitor mix, distribution to one or several recording tracks,

power amp(s), control room and 2-track outputs

• Mix: Setting the volume level, frequency distribution and positioning of the

individual signals in the stereo eld, level control of the total mix to match

the recording devices/crossover/power amplier(s). All other mixer functions

can be included in this main function

The interface of BEHRINGER mixing consoles is optimized for these tasks enabling

you to easily keep track of the signal path.

1.2 The user’s manual

The user’s manual is designed to give you both an overview of the controls,

aswell as detailed information on how to use them. In order to help you

understand the links between the controls, we have arranged them in groups

according to their function. The illustrations at the beginning of each chapter

show the controls described in each respective chapter.

◊ The block diagram supplied with the mixing console gives you an

overview of the connections between the inputs and outputs, as well

as the associated switches and controls.

For the moment, just try and trace the signal path from the microphone input

to the FX send connector. Don’t be put o by the huge range of possibilities;

it’seasier than you think! If you look at the overview of the controls at the same

time, you’ll be able to quickly familiarize yourself with your mixing console and

you’ll soon be making the most of all its many possibilities.

If you need to know more about specic issues, please visit our website at

http://behringer.com, where you’ll nd explanations of (for example) eects and

dynamics applications.

1.3 Before you get started

1.3.1 Shipment

Your mixing console was carefully packed in the factory to guarantee safe

transport. Nevertheless, we recommend that you carefully examine the

packaging and its contents for any signs of physical damage, which may have

occurred during transit.

◊ If the unit is damaged, please do NOT return it to us, but notify your

dealer and the shipping company immediately, otherwise claims for

damage or replacement may not be granted.

1.3.2 Initial operation

Be sure that there is enough space around the unit for cooling purposes and to

avoid over-heating please do not place your mixing console on high-temperature

devices such as radiators or power amps. The console is connected to the

mains via the supplied cable. The console meets the required safety standards.

Blownfuses must only be replaced by fuses of the same type and rating.

◊ Never connect the XENYX to the power supply unit when the latter is

connected to the mains! First connect the power supply unit to the

console, then connect the power supply unit to the mains.

◊ Please note that all units must be properly grounded. For your own

safety, you should never remove any ground connectors from electrical

devices or power cables, or render them inoperative.

◊ Please ensure that only qualified people install and operate the

mixing console. During installation and operation, the user must have

sufficient electrical contact to earth, otherwise electrostatic discharges

might affect the operation of the unit.

Behringer Xenyx 1002 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer Xenyx 1002

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info