Bedienungsanleitung Behringer Xenyx 1002FX (Seite 5 von 15) (Englisch)

496327

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

5 XENYX 1202FX/1002FX User Manual

1.3 Before you get started

1.3.1 Shipment

Your mixing console was carefully packed in the factory to guarantee safe

transport. Nevertheless, we recommend that you carefully examine the

packaging and its contents for any signs of physical damage that may have

occurred during transit.

◊ If the unit is damaged, please do NOT return it to us, but notify your

dealer and the shipping company immediately, otherwise claims for

damage or replacement may not be granted.

◊ To assure optimal protection of your XENYX during use or transport,

we recommend utilizing a carrying case.

◊ Please always use the original packaging to avoid damage due to

storage or shipping.

◊ Never let unsupervised children play with the XENYX or with

its packaging.

◊ Please dispose of all packaging materials in an environmentally-

friendly fashion.

1.3.2 Initial operation

Be sure that there is enough space around the unit for cooling purposes and to

avoid overheating please do not place your mixing console on high-temperature

equipment such as radiators or power amps.

◊ Never connect the XENYX to the power supply unit when the latter is

connected to the mains! First connect the power supply unit to the

console, then connect the power supply unit to the mains.

◊ Please make sure that all units have a proper ground connection.

For your own safety, never remove or disable the ground

conductor from the unit or on the AC power cord. The unit should

always be connected to a mains socket outlet with a protective

earthing connection.

◊ When installing the product, ensure the appliance coupler or power

cord is easily accessible for disconnecting the unit from mains.

1.3.3 Online registration

Please register your new BEHRINGER equipment right after your purchase

by visiting http://behringer.com and read the terms and conditions of our

warrantycarefully.

Should your BEHRINGER product malfunction, it is our intention to have it

repaired as quickly as possible. To arrange for warranty service, please contact

the BEHRINGER retailer from whom the equipment was purchased. Shouldyour

BEHRINGER dealer not be located in your vicinity, you may directly contact

one of our subsidiaries. Corresponding contact information is included in the

original equipment packaging (Global Contact Information/European Contact

Information). Should your country not be listed, please contact the distributor

nearest you. A list of distributors can be found in the support area of our

website(http://behringer.com).

Registering your purchase and equipment with us helps us process your repair

claims more quickly and eciently.

Thank you for your cooperation!

2. Control Elements and Connectors

This chapter describes the various control elements of your mixing console.

Allcontrols, switches and connectors will be discussed in detail.

2.1 Mono channels

Fig. 2.1: Connectors and controls on the monochannels

MIC

Each mono input channel oers a balanced microphone input via the XLR

connector and also features switchable +48 V phantom power supply for

condenser microphones. The XENYX preamps provide undistorted and noise-free

gain as is typically known only from costly outboard preamps.

◊ Please mute your playback system before you activate the phantom

power supply to prevent switch-on thumps being directed to your

loudspeakers. Please also note the instructions in chapter 2.4

“Main section”.

LINE IN

Each mono input also features a balanced line input on a ¼"connector.

Unbalanced devices (mono connectors) canalso be connected to these inputs.

◊ Please remember that you can only use either the microphone

or the line input of a channel at any one time. You can never use

both simultaneously!

GAIN

Use the GAIN control to adjust the input gain. This control should always be

turned fully counterclockwise whenever you connect or disconnect a signal

source to one of the inputs.

The scale has 2 dierent value ranges: the rst value range (+10 to +60 dB)

refers to the MIC input and shows the amplication for the signals fed in there.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer Xenyx 1002FX Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer Xenyx 1002FX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info