Bedienungsanleitung Behringer Xenyx 2442FX (Seite 5 von 12) (Englisch)

542741

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

ENGLISH

XENYX 1622FX/1832FX/2222FX/2442FX User Manual

ENGLISH

XENYX 1622FX/1832FX/2222FX/2442FX User Manual

BAL

The BAL(ANCE) control has a similar function to the PAN

control in the mono channels.

The balance control determines the levels of the left and

right input signals relative to each other before both signals

are routed to the left/right main mix bus (or odd/even

subgroup).

The remaining control elements in the stereo channels

perform the same functions as their counterparts in the

mono channels (MUTE switch, MUTE and CLIP LEDs, SOLO

switch, SUB and MAIN switches and channel fader).

Interface panel and main section2.3

Where it was useful to trace the signal ow from top to

bottom in order to gain an understanding of the channel

strips, we now look at the mixing console from left to right.

The signals are, so to speak, collected from the same point

on each of the channel strips and then routed to the main

section all together.

MON control, aux sends 1, 2 and 3 (FX)2.3.1

Turning up the AUX 1 control in a channel routes the signal

to the aux send bus 1.

As the 1832FX is equipped with an additional monitor ◊

path, its rst aux control in the channel strips is named

MON. The console also has a dedicated master fader

(MON SEND) for this aux path.

AUX SEND 1, 2 and 4

The AUX SEND 1 control governs the master send level of the

mix created by the individual channel AUX 1 sends.

Likewise, the AUX SEND 2 contol is the master control for the

aux 2 bus, and AUX SEND 4 controls the AUX 4 bus.

Fig. 2.7: The AUX SEND controls of the main section!

AUX SEND 3 (FX)

The FX control determines the signal level for eects

processing, i.e. regulates the level to an external (or the inter-

nal) eects device.

1622FX and 1832FX: On these consoles, this function is

performed by the AUX SEND 2 control (FX).

SOLO

You can use the SOLO switch to separately monitor the aux

sends via the CONTROL ROOM/PHONES outputs and check

these with the level meters.

If you want to monitor the signal of just one AUX bus, ◊

none of the other SOLO SWITCHES should be pressed

and the MODE switch should be in the SOLO position

(not depressed).

Aux send jacks2.3.2

Fig. 2.8: Aux send jacks

AUX SEND jacks

The AUX SEND jack should be used when hooking up a

monitor power amp or active monitor speaker system. The

relevant aux path should be set pre-fader.

On the 2222FX, aux send 1 is hard wired as pre-fader ◊

and hence called MON. Model 1832FX has a dedicated

monitor output (MON OUT jack), cf. chapter 2.3.4.

As already mentioned, the aux sends in the channels—if

set post-fader—can be used to connect to external eects

devices.

AUX SEND (FX)

The AUX SEND (FX) jack carries the master aux mix (from the

channel’s FX controls). You can connect this to an external

eects device to process the FX bus. The processed signal

can then be brought from the eects device back into the

STEREO AUX RETURN jacks.

Stereo aux return connectors2.3.3

Fig. 2.9: The aux return connectors

XENYX2442FX

XENYX2442FX XENYX1832FX

XENYX2442FXXENYX1832FX

On the 2222FX, 1832FX and 1622FX the STEREO AUX ◊

RETURN jacks are located on the front panel of the unit.

STEREO AUX RETURN

The STEREO AUX RETURN 1 jacks generally serve as the

return for the eects mix (created using the post-fader

aux sends) by connecting the output of an external eects

device. If only the left jack is connected, the AUX RETURN is

automatically switched to mono.

You can also use these jacks as additional line inputs.◊

All stereo aux returns are balanced, but can of course also

be used with unbalanced connectors. If you use an aux send

for monitoring, the associated unused stereo aux returns are

available for other line level signals (e.g. keyboards).

A signal fed into the stereo return jacks can be output ◊

via an aux send jack. More information on this can be

found in chapter 2.3.5 “STEREO AUX RETURN 1/2 (TO

AUX SEND)”.

STEREO AUX RETURN FX

The STEREO AUX RETURN FX jacks accept the eects mix

return (created using the channel FX sends). If these jacks are

already in use as additional inputs, you can route the eects

signal back into the console via a dierent channel. The

advantage of this is that you can now use that channel’s EQ

on the eects return signal.

In this instance, the FX control of the channel being ◊

used as an eects return should be turned fully

counterclockwise, otherwise feedback problems could

occur!

If you wish to use the internal eects processor, do not ◊

plug any connectors into the STEREO AUX RETURN FX

jacks, unless you want to tap the processed signal via

the FX OUT (2222FX and 2442FX only).

The monitor section of the 1832FX2.3.4

One of the ways that the 1832FX diers from the other

models of this series is that it has a separate monitor output.

Fig. 2.10: Monitor output of the 1832FX

The rst aux send (MON) on this console is used to set up

the monitor mix from the channels and route it to the MON

SEND fader.

Fig. 2.11: Monitor fader of the 1832FX

MUTE

Press the MUTE switch to mute the monitor send.

SOLO

The SOLO switch routes the monitor send to the solo bus

(post-fader and post-mute) or to the PFL bus (pre-fader and

pre-mute). The position of the MODE switch in the main

section determines which of the buses is selected.

Stereo aux return control2.3.5

STEREO AUX RETURN 1

The STEREO AUX RETURN 1 control determines the level of

this signal in the main mix. If STEREO AUX RETURN 1 is used

as eects return, this will determine the level of the eects

when mixed with any “dry” channel signal.

When used in this way, the eects device should be set ◊

at 100% eect.

Fig. 2.12: Stereo aux return and stereo aux return (to aux send) controls

XENYX1832FX

XENYX2442FX

Behringer Xenyx 2442FX Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer Xenyx 2442FX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info