Bedienungsanleitung Behringer Xenyx X2442USB (Seite 10 von 19) (Englisch)

660523

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

10 XENYX X2442USB/X2222USB/X1832USB/X1622USB User Manual

Monitor mix with eect

In this instance, your eects device should be set up as follows: the AUX SEND2

jack should be connected to the L/Mono input of your eects device, with its

outputs coming back into the STEREO AUX RETURN 1 jacks.

Connect the AUX SEND 1 jack output to the amplier of your monitor system.

TheAUX SEND 1 master control determines the overall volume of the

monitormix.

Using the STEREO AUX RETURN (TO AUX SEND) control, the eect signal can now

be blended into the monitor mix.

You can easily use the headphones distribution amplier BEHRINGER POWERPLAY

PRO HA4700/HA8000 to provide four (HA8000: eight) stereo headphone mixes for

your studio.

The following table shows which jacks on the console can be used for

thispurpose.

External eects device

receives signal from...

External eects device

routes signal back to...

The eect signal reaches the

monitor mix via…

X1622USB AUX SEND 2

STEREO AUX RETURN 1

connectors

STEREO AUX RETURN 1

(TO AUX SEND 1) control

X1832USB AUX SEND 1

STEREO AUX RETURN 2

connectors

MONITOR switch of the

FX/AUX 2 RET

X2222USB AUX SEND 2

STEREO AUX RETURN

connectors 1 or 2

STEREO AUX RETURN 1

(TO AUX SEND 1) control

X2442USB AUX SEND 2

STEREO AUX RETURN 1

connectors

STEREO AUX RETURN 1

(TO AUX SEND 1) control

optional: AUX SEND 1

STEREO AUX RETURN 2

connectors

STEREO AUX RETURN 2

(TO AUX SEND 2) control

Tab. 2.1: Connectors and controls for monitor mix with eect

STEREO AUX RETURN FX

On consoles X1622USB and X1832USB this is the STEREO AUX RETURN 2,

onconsoles X2222USB and X2442USB this is the STEREO AUX RETURN 3.

Use the STEREO AUX RETURN FX control to determine the level of the signal

routed from the AUX RETURN FX jacks to the main mix. If nothing is connected to

these jacks, the output of the built-in eects module will appear.

MAIN MIX / TO SUBS

This switch routes the signal fed in via the STEREO AUX RETURN FX jacks either to

the main mix (not pressed) or to the submix (pressed).

On the X2442USB you can select which subgroup the signal is assigned to

(switches 1-2 / 3-4, to the right of MAIN MIX / TO SUBS).

SOLO RETURNS

Additionally, this model allows you to route the aux returns together to the solo

bus and the PFL bus. The LED lights up when Solo is on.

STEREO AUX RETURN 4 (X2442USB only)

This control behaves the same way as the other stereo aux returns. Additionally,

it provides for a simple monitor path using the switch PHONES/CTRL ROOM ONLY.

PHONES/CTRL ROOM ONLY

Use this switch to route the signal appearing at the AUX RETURN 4 jacks to the

control room and headphones outputs.

2.3.6 Supplement to X1832USB

The X1832USB has a stereo fader for the AUX RETURN FX and oers a variety

of routing options: MUTE disables the eect return (but not PFL of course!),

SOLOroutes it to the Solo or PFL busses, SUB to the subgroups and MAIN to the

main mix.

X1832USB

Fig. 2.13: The FX/AUX 2 return fader of the X1832USB

MON

The MON switch routes the signals appearing at the AUX RETURN2 jacks to the

monitor path, along with the monitor signals from the channels.

If you wish to route the eect signal to the monitor mix, you can also switch aux

1 to pre-fader, drive the eect device from the aux 1 output and return the eect

signal via AUX RETURN 2 to the monitor signal.

2.3.7 XPQ Surround function (X1832USB only)

X1832USB

Fig. 2.14: Control elements of the surround function

The XPQ surround function can be enabled/disabled with the

XPQ TO MAIN switch. This is a built-in eect that widens the

stereo width, thus making the sound more lively and transparent.

Usethe SURROUND control to determine the intensity of this eect.

VOICE CANCELLER

Here, you have a lter circuitry that lets you almost entirely remove

the vocal portion of a recording. The lter is constructed in such a way

that voice frequencies are targeted without majorly aecting the rest

of the signal. Additionally, the lter seizes only the middle of the stereo image,

exactly there where the vocals are typically located.

◊ Connect the signal sources you wish to process using the Voice Canceller

to the CD/TAPE INPUT connectors. The Voice Canceller circuitry is not

available for other inputs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer Xenyx X2442USB Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer Xenyx X2442USB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info