Bedienungsanleitung BEKO B3W51041IW (Seite 33 von 48) (Englisch)

817019

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

EN / 33

plication, you can use your smart appliance

to perform various operations on the ma-

chine. Furthermore, you can use some fea-

tures only with HomeWhiz function.

In order to use the Bluetooth feature of your

machine, you must download HomeWhiz

application from the application store of

your smart appliance.

Make sure your smart appliance is connec-

ted to the internet to install the application.

If you are using the application for the first

time, please follow the instructions on the

screen to complete your user account re-

gistration. Once the registration procedure

is complete, you can use all products with

the HomeWhiz feature in your house on

this account.

You can touch the “Appliances” tab in the

HomeWhiz application to view appliances

paired with your account. Following the in-

stallation of the application, HomeWhiz

function enables the washing machine to

send you instant notifications via your

smart appliance.

In order to use the HomeWhiz func-

tion, the application must be in-

stalled on your smart appliance,

and your washing machine must be

paired with your smart appliance

via Bluetooth. If your washing ma-

chine is not paired to your smart

device it works as an appliance

which does not have a HomeWhiz

feature.

Your product will operate as paired

to your smart device via bluetooth.

The controls made by means of the

application will be enabled through

this pairing. Therefore the

bluetooth signal strength between

the appliance and the smart device

must be adequate.

Please visit www.homewhiz.com to

see the Android and iOS versions

supported by the HomeWhiz applic-

ation.

All the safety measures described

in "GENERAL SAFETY INSTRUC-

TIONS" section of your user

manual apply to the remote opera-

tion through HomeWhiz function as

well

6.15.1 HomeWhiz Setup

In order run the application, a connection

must be established between your appli-

ance and HomeWhiz application. In order

to establish this connection, you must fol-

low the steps given below for the setup pro-

cess on both your appliance and the Home-

Whiz Application.

1. If you are adding a device for the first

time, touch “Appliances” tab on the

HomeWhiz Application. Select “ADD AP-

PLIANCE” (touch here for setting up a

new appliance) button in the upper right

corner. Perform the setup by following

both the steps below and the steps in

the HomeWhiz Application.

2. To start the setup, make sure that your

machine is turned off. Press and hold

the Temperature button and the Remote

Control Function button simultaneously

for 3 seconds to switch your machine to

HomeWhiz setup mode.

3. When the appliance is in HomeWhiz

setup mode, you will see an animation

on the display and the bluetooth icon

will flash until your machine gets paired

with smart device. Only programme

knob will be active in this mode. Other

buttons will be inactive.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO B3W51041IW Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info