Bedienungsanleitung BEKO B3WT5841WS2 (Seite 30 von 44) (Englisch)

816564

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

EN / 30

You can switch on and off the ma-

chine with On / Off button when the

Child Lock is active. When you

switch on the machine again, pro-

gramme will resume from where it

has stopped.

When the Child Lock is enabled, an

audio warning will be given if the

buttons are pressed. Audio warning

will be cancelled if the buttons are

pressed five times consecutively.

To activate the child lock:

Press and hold the related auxiliary function

button for 3 seconds. After the countdown

as “3-2-1" on the display is over, Child Lock

symbol appears on the display. When this

warning is displayed, you can release the

Auxiliary Function button 3.

To deactivate the child lock:

Press and hold the related auxiliary function

button for 3 seconds. After the countdown

as “3-2-1" on the display is over, Child Lock

symbol disappears.

• Bluetooth

You can use the bluetooth connection func-

tion to pair your machine with your smart

device. This way, you can use your smart

device to get information about your ma-

chine and control it.

To activate bluetooth connection:

Press and hold Remote Control function but-

ton for 3 seconds. Countdown “3-2-1” will

be displayed, and then Bluetooth icon will

appear on the display. Release Remote Con-

trol function button. The bluetooth icon will

flash while the product is pairing with smart

device. If connection is successful, icon will

remain on.

To deactivate bluetooth connection:

Press and hold Remote Control function but-

ton for 3 seconds. Countdown “3-2-1” will

be displayed, and then Bluetooth icon will

disappears on the display.

First setup of the HomeWhiz applic-

ation must be complete for the

bluetooth connection to be activ-

ated. After setup, pressing the re-

mote control function button while

the knob is at Download Pro-

gramme/Remote Control position

will automatically activate the

bluetooth connection.

6.9 End Time

Time display

When the end time function is selected, the

remaining time until the programme starts is

shown in hours such as 1h, 2h, and the re-

maining time to complete the programme

after your programme starts is shown in

hours and minutes as in the 01:30 example.

Programme duration may differ from

the values in section "Programme

and consumption table" depending

on the water pressure, water hard-

ness and temperature, ambient tem-

perature, amount and the type of

laundry, auxiliary functions selected

and the changes at the mains

voltage.

With the End Time function, the end time of

the programme may be set up to 24 hours.

After pressing End Time button, the pro-

gramme's estimated ending time is dis-

played. If the End Time is set, End Time in-

dicator is illuminated.

In order for the End Time function is activ-

ated and the programme is completed at the

end of the specified time, you must press

Start/Pause button after adjusting the time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO B3WT5841WS2 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO B3WT5841WS2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info