Bedienungsanleitung BEKO B5D58544U (Seite 17 von 60) (Englisch)

817028

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

EN / 17

5. The end of the hose should not be bent,

it should not be stepped on and the

hose must not be pinched between the

drain and the product. Otherwise, water

discharge issues may emerge.

6. If the length of the hose is too short, use

it by adding an original extension hose.

The overall length of the hose shall not

be longer than 3.2 m. To prevent water

leaks, always secure the connection

between the extension hose and the

draining hose of the product with a suit-

able clamp so that it does not come off

and cause leaks.

4.6 Adjusting the Stands

WARNING

In order to ensure that the product

operates more silently and vibra-

tion-free, it must stand level and

balanced on its feet. Ensure that

the product is balanced by adjust-

ing the feet. Otherwise, the product

may move from its place and cause

crushing, noise and vibration prob-

lems.

1. Loosen the nuts on the feet in the direc-

tion of the arrow with the tool in the user

manual bag.

2. Adjust the feet until the product stands

level and balanced. You can move the

feet up by turning them counter-clock-

wise and down by turning them clock-

wise.

3. Re-tighten all lock nuts with the tool in

the direction of the arrow. You can

move the nuts down by turning them

counter-clockwise and up by turning

them clockwise.

4.7 Electrical Connection

Connect the product to a grounded outlet

protected by a 13 A fuse. Our company

shall not be responsible for the damages

that shall be incurred due to using the

product without grounding according to

local regulations.

• Connection must comply with national

regulations.

• The electrical connection cable infra-

structure of the product must be ad-

equate and suitable for product require-

ments. It is recommended to use a

Ground Fault Circuit Breaker (GFCI).

• Power cable plug must be within easy

reach after installation.

• If the current supply to the fuse or

breaker in the house is less than 13

Amps, have a qualified electrician install

a 13 amp supply.

• The voltage specified in the "Technical

specifications" section must be equal to

your mains voltage.

• Do not make connections via extension

cables or multi-plugs. Overheating and

burning may occur due to the connecting

cable.

Damaged power cables should be

replaced by the authorised service

in order to prevent possible danger.

Important

Fitting a different plug:

As the colours of the wires in the mains

lead of this appliance may not correspond

with the coloured markings identifying the

terminals on your plug, proceed as follows:

1. Connect the green - yellow or green

(earth) wire to the terminal in the plug

marked ‘E’ or with the symbol f or col-

oured green and yellow or green.

2. Connect the blue (neutral) wire to the

terminal in the plug marked ‘N’ or col-

oured black.

3. Connect the brown (live) wire to the ter-

minal in the plug marked ‘L’ or coloured

red.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO B5D58544U Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info