Bedienungsanleitung BEKO B5RCNE406LXBRW (Seite 13 von 112) (Englisch, Holländisch, Französisch, Italienisch)

797091

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

EN / 13

*Optional: Figures in this user manual are

schematic and may not exactly match your

product. If your product does not comprise

the relevant parts, the information pertains

to other models.

4 Installation

Read the “Safety Instructions” sec-

tion first!

4.1 Right Place For Installation

Contact the Authorized Service for the

product's installation. To prepare the

product for installation, see the information

in the user manual and make sure the elec-

tric and water utilities are as required. If

not, call an electrician and plumber to ar-

range the utilities as necessary.

WARNING:

The manufacturer assumes no re-

sponsibility for any damages

caused by the work carried out by

unauthorized persons.

WARNING:

The product’s power cable must be

unplugged during installation. Fail-

ure to do so may result in death or

serious injuries!

WARNING:

If the door span is too narrow for

the product to pass, remove the

door and turn the product side-

ways; if this does not work, contact

the authorized service.

• Place the product on a flat surface to

avoid vibration.

• Place the product at least 30 cm away

from the heater, stove and similar

sources of heat and at least 5 cm away

from electric ovens.

• Do not expose the product to direct sun-

light or keep it in damp environments.

• Your product requires adequate air circu-

lation to function efficiently. If the

product will be placed in an alcove, re-

member to leave at least 5 cm clearance

between the product and the ceiling, rear

wall and the side walls.

• Check if the rear wall clearance protec-

tion component is present at its location

(if provided with the product).

• If the component is not available, or if it

is lost or fallen, position the product so

that at least 5 cm clearance shall be left

between the rear surface of the product

and the wall of the room. The clearance

at the rear is important for efficient oper-

ation of the product.

4.2 Electrical Connection

Do not use extension or multi sock-

ets in power connection.

Damaged power cable must be re-

placed by Authorized Service.

When placing two coolers in adja-

cent position, leave at least 4 cm

distance between the two units.

• Our firm will not assume responsibility

for any damages due to usage without

earthing and power connection in compli-

ance with national regulations.

• The power cable plug must be easily ac-

cessible after installation.

• Do not use multi-group plug with or

without extension cable between the wall

socket and the refrigerator.

4.3 Attaching the Plastic Wedges

Use the plastic wedges provided with the

product to maintain sufficient space for air

circulation between the product and the

wall.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO B5RCNE406LXBRW Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO B5RCNE406LXBRW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info