Bedienungsanleitung BEKO B5T60230M (Seite 50 von 68) (Deutsch, Englisch)

816609

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

50 Dryer / User Manual

4 Installation • The dryer must be installed on the

Washing Machine with the help of the

Stacking Kit, and the Dryer Tank and

Washing Machine valve connections must

be made.

• First, stack your new dryer over your

washing machine using the Stacking

Kit. Next, open the front feet by 5 mm

to balance the machine. Finally, ensure

that everything is secure, and finish the

installation.

• If you do not want to use the Savewater

feature, pay attention to the following;

• The Dryer must be installed on a stable,

flat surface and used with the Direct drain

feature (Pages 16 – 4.3).

• Dryer machine is heavy. Do not move it by

yourself.

• Operate the drying machine in an

environment free of dust with good

ventilation.

• The gap between the drying machine and

the floor shall not be reduced via materials

such as rugs, pieces of wood and bands.

• Do not block the ventilation grilles of the

drying machine.

• There shall not be doors that can be

locked, sliding doors or hinged doors near

the installation environment of the drying

machine that may block the loading door

to be opened.

• Once the drying machine is installed,

the connections must stay stable. After

placing the drying machine, ensure that

the back wall does not come in contact

with any extrusion (a water tap, electrical

outlet etc.).

• Place the drying machine with at least 1

cm space between the product and the

furniture edges.

Read the “Safety Instructions” first!

Before consulting the nearest Authorized

Service for installing the drying machine, see

the information in the user guide and make sure

the electric and water utilities are as required. If

not, call an electrician and plumber to arrange

the utilities as necessary.

It is customer's responsibility to

prepare the location the drying

machine shall be placed on and

also have power and waste water

installation prepared.

Check for any damage on the

drying machine before installing it. If

drying machine is damaged, do not

get it installed. Damaged products

cause a risk for your safety.

Wait 12 hours prior to operating the

drying machine.

NOTICE

The product includes a cooling

agent and if the product is operated

right after its transported, it may

get damaged. After each time the

product is moved, it shall be left to

rest for 12 hours.

4.1 SaveWater product features and

the right location for installation

• The SaveWater feature can only be

used after installation with SaveWater

compatible Washing Machines.

• SaveWater products have a fixed water

tank and cannot be removed from the

tank.

• SaveWater products are machines that

save up to 10% of water by using the

water accumulated by the dryer in the

washing machine.

• SaveWater products are machines that

allow you to see the water accumulated in

your tank with the help of the window on

the windshield.

• If you want to use the SaveWater

feature, pay attention to the following;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO B5T60230M Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO B5T60230M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info