Bedienungsanleitung BEKO B5WT5941082W (Seite 33 von 44) (Englisch)

816200

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

EN / 33

In order to use the HomeWhiz func-

tion, the application must be in-

stalled on your smart appliance,

and your washing machine must be

paired with your smart appliance

via Bluetooth. If your washing ma-

chine is not paired to your smart

device it works as an appliance

which does not have a HomeWhiz

feature.

Your product will operate as paired

to your smart device via bluetooth.

The controls made by means of the

application will be enabled through

this pairing. Therefore the bluetooth

signal strength between the appli-

ance and the smart device must be

adequate.

Please visit www.homewhiz.com to

see the Android and iOS versions

supported by the HomeWhiz applic-

ation.

All the safety measures described

in "GENERAL SAFETY INSTRUC-

TIONS" section of your user

manual apply to the remote opera-

tion through HomeWhiz function as

well

6.15.1 HomeWhiz Setup

In order run the application, a connection

must be established between your appli-

ance and HomeWhiz application. In order

to establish this connection, you must fol-

low the steps given below for the setup pro-

cess on both your appliance and the Home-

Whiz Application.

a. If you are adding a device for the first

time, touch “Appliances” tab on the

HomeWhiz Application. Select “ADD

APPLIANCE” (touch here for setting up

a new appliance) button in the upper

right corner. Perform the setup by fol-

lowing both the steps below and the

steps in the HomeWhiz Application.

b. To start the setup, make sure that your

machine is turned off. Press and hold

the Temperature button and the Remote

Control Function button simultaneously

for 3 seconds to switch your machine to

HomeWhiz setup mode.

c. When the appliance is in HomeWhiz

setup mode, you will see an animation

on the display and the bluetooth icon

will flash until your machine gets paired

with smart device. Only programme

knob will be active in this mode. Other

buttons will be inactive.

d. Follow the instructions in display of

HomeWhiz application.

e. Wait until the installation is complete.

Once the setup is completed, give your

washing machine a name. Now, you

can tap and see the product you have

added in the HomeWhiz Aplication.

If you cannot successfully perform

the setup within 5 minutes, your

washing machine will turn off auto-

matically In this case, you will have

to start over the setup procedure. If

the problem persists contact the

Authorised Service Agent.

You can use your washing machine

with more than one smart appli-

ance. In order to do this, download

the HomeWhiz application to the

other smart appliance. When you

launch the application, you must

log into the account you previously

created and paired with your wash-

ing machine. Otherwise, please

read "Setting up a washing ma-

chine that is connected to someone

else's account".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO B5WT5941082W Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO B5WT5941082W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info