Bedienungsanleitung BEKO B5WT594108W2 (Seite 39 von 44) (Englisch)

816576

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

EN / 39

• Place the end of the hose in a large con-

tainer. Drain the water into the container

by pulling out the plug at the end of the

hose. When the container is filled, close

the end of the hose with the plug. Drain all

water by repeating the procedure spe-

cified above after draining the container.

• When the water drain is finished, close the

end with the plug again and fix the hose in

its place.

• Unscrew the pump filter.

a. Clean any residues inside the filter as well

as fibres, if any, around the pump im-

peller region.

b. Replace the filter.

c. If the filter cap is composed of two

pieces, close the filter cap by pressing on

the tab. If it is one piece, seat the tabs in

the lower part into their places first, and

then press the upper part to close.

8 Troubleshooting

Please read the “Safety Instructions”

section first!

Programmes do not start after the load-

ing door is closed.

• Start / Pause / Cancel button is not

pressed. >>> Press Start / Pause / Cancel

button.

• It may be difficult to close the loading door

in case of excessive loading. >>> Reduce

the amount of laundry and make sure that

the loading door is closed properly.

Programme cannot be started or selec-

ted.

• The product has switched to self-protec-

tion mode due to a supply problem (line

voltage, water pressure, etc.). >>> De-

pending on the product model, select an-

other program by turning the Program Se-

lection button or pressing and holding the

On/Off button for 3 seconds to cancel the

program. Previous programme will be can-

celled. See Cancelling the Programme

[}33]

Water inside the product.

• Some water has remained in the product

due to the quality control processes in the

production. >>> This is not a failure; water

is not harmful to the product.

The product does not take water in.

• Tap is turned off. >>> Turn on the taps.

• Water inlet hose is bent. >>> Flatten the

hose.

• Water inlet filter is clogged. >>> Clean the

filter.

• Loading door is not closed. >>> Close the

door.

The product does not drain water.

• Water drain hose is clogged or twisted.

>>> Clean or flatten the hose.

• Pump filter is clogged. >>> Clean the

pump filter.

Product vibrates or makes noise.

• Product is standing unbalanced. >>> Ad-

just the stands to balance the product.

• A hard substance has entered into the

pump filter. >>> Clean the pump filter.

• Transportation safety bolts are not re-

moved. >>> Remove the transportation

safety bolts.

• Laundry quantity in the product is too little.

>>> Add more laundry to the product.

• Excessive laundry is loaded in the product.

>>> Take out some of the laundry from

the product or distribute the load by hand

to balance it homogeneously in the

product.

• Product is leaning on a rigid item. >>>

Make sure that the product is not leaning

on anything.

There is water leaking from the bottom

of the product.

• Water drain hose is clogged or twisted.

>>> Clean or flatten the hose.

• Pump filter is clogged. >>> Clean the

pump filter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO B5WT594108W2 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO B5WT594108W2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info