Bedienungsanleitung BEKO BBCW12400X (Seite 47 von 52) (Englisch)

817040

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

EN / 47

• Do not use hard metal scrapers and ab-

rasive cleaners. They may damage the

surfaces.

• Ensure that the joints of the components

of the product are not left damp and with

detergent. Otherwise, corrosion may occur

on these joints.

7.2 Cleaning Accessories

Do not put the product accessories in a

dishwasher unless otherwise stated in the

user’s manual.

7.3 Cleaning the Control Panel

• When cleaning the panels with knob-con-

trol, wipe the panel and knobs with a

damp soft cloth and dry with a dry cloth.

Do not remove the knobs and gaskets un-

derneath to clean the panel. The control

panel and knobs may be damaged.

• While cleaning the inox panels with knob

control, do not use inox cleaning agents

around the knob. The indicators around

the knob can be erased.

• Clean the touch control panels with a

damp soft cloth and dry with a dry cloth. If

your product has a key lock feature, set

the key lock before performing control

panel cleaning. Otherwise, incorrect de-

tection may occur on the keys.

7.4 Cleaning the inside of the oven

(cooking area)

Follow the cleaning steps described in the

"General Cleaning Information" [}45] section

according to the surface types in your oven.

Cleaning the side walls of the oven

The side walls in the cooking area can only

be covered with enamel or catalytic walls. It

varies by model. If there is a catalytic wall,

refer to the “Catalytic surfaces” [}46] section

for information.

If your product is a wire shelf model, remove

the wire shelves before cleaning the side

walls. Then complete the cleaning as de-

scribed in the "General Cleaning Informa-

tion" [}45] section according to the side wall

surface type.

To remove the side wire shelves:

a. Hold the side wire shelf at the bottom.

Pull it down and free it from the bottom

slots.

b. Pull the side wire shelf in the opposite dir-

ection of the side wall.

c. Completely remove the side wire shelf by

pulling it up.

7.5 Cleaning the Oven Lamp

In the event that the glass door of the oven

lamp in the cooking area becomes dirty;

clean using dishwashing detergent, warm

water and a soft cloth or sponge and dry

with a dry cloth. In case of oven lamp failure,

you can replace the oven lamp by following

the sections that follow.

Replacing the oven lamp

General Warnings

• To avoid the risk of electric shock before

replacing the oven lamp, disconnect the

product and wait for the oven to cool. Hot

surfaces may cause burns!

• This oven is powered by an incandescent

lamp with less than 40 W, less than 60

mm in height, less than 30 mm in dia-

meter, or a halogen lamp with G9 sockets

with less than 60 W power. Lamps are

suitable for operation at temperatures

above 300 °C. Oven lamps are available

from Authorised Services or licensed tech-

nicians. This product contains a G energy

class lamp.

• The position of the lamp may differ from

that is shown in the figure.

• The lamp used in this product is not suit-

able for use in the lighting of home rooms.

The purpose of this lamp is to help the

user see food products.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO BBCW12400X Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info