Bedienungsanleitung BEKO BBIM13500XPSW (Seite 38 von 96) (Deutsch, Englisch)

816874

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

EN / 38

• Do not use hard metal scrapers and ab-

rasive cleaners. They may damage the

surfaces.

• Ensure that the joints of the components

of the product are not left damp and with

detergent. Otherwise, corrosion may oc-

cur on these joints.

7.2 Cleaning Accessories

Do not put the product accessories in a

dishwasher unless otherwise stated in the

user’s manual.

7.3 Cleaning the Control Panel

• When cleaning the panels with knob-con-

trol, wipe the panel and knobs with a

damp soft cloth and dry with a dry cloth.

Do not remove the knobs and gaskets un-

derneath to clean the panel. The control

panel and knobs may be damaged.

• While cleaning the inox panels with knob

control, do not use inox cleaning agents

around the knob. The indicators around

the knob can be erased.

• Clean the touch control panels with a

damp soft cloth and dry with a dry cloth.

If your product has a key lock feature, set

the key lock before performing control

panel cleaning. Otherwise, incorrect de-

tection may occur on the keys.

7.4 Cleaning the inside of the oven

(cooking area)

Follow the cleaning steps described in the

"General Cleaning Information" section ac-

cording to the surface types in your oven.

Cleaning the side walls of the oven

The side walls in the cooking area can only

be covered with enamel or catalytic walls. It

varies by model. If there is a catalytic wall,

refer to the “Catalytic surfaces” section for

information.

If your product is a wire shelf model, re-

move the wire shelves before cleaning the

side walls. Then complete the cleaning as

described in the "General Cleaning Informa-

tion" section according to the side wall sur-

face type.

To remove the side wire shelves:

1. Remove the front of the wire shelf by

pulling it on the side wall in the opposite

direction.

2. Pull the wire shelf towards you to re-

move it completely.

3. To reattach the shelves, the procedures

applied when removing them must be

repeated from the end to the beginning,

respectively.

7.5 High temperature self-cleaning

The oven is equipped with a pyrolysis fea-

ture. The oven heats up to a temperature of

approximately 420-480 °C and burns until

the existing dirt turns to ash. A strong

smoke may be generated. Provide good

ventilation. High-temperature cleaning

should be performed after approximately

every 10 uses of the oven.

General warnings

Hot surfaces cause burns!

Do not touch the product during

self-cleaning and keep children

away from the product. Wait at

least 30 minutes before removing

the residue.

• Before using the pyrolysis function, re-

move all accessories, the telescopic

shelf and the side shelves (if any). If not

removed, the accessories and side wire

shelves will be damaged.

• If your product has a pyro proof access-

ory (resistant to high temperature self-

cleaning), you do not need to remove

these accessories from the oven.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO BBIM13500XPSW Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info