Bedienungsanleitung BEKO BBIM17300BMPEF (Seite 34 von 84) (Deutsch, Englisch)

816873

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

EN / 34

9. When the symbol disappears on the

display, remove the remaining deposits

with vinegar water.

10.Touch any key to stop the audible warn-

ing.

After the pyrolysis function is com-

pleted, the door lock will be active

until the oven cools to the appropri-

ate temperature. If you want to

cook at this time, "H” will appear

on the display and cooking will not

be possible.

Self cleaning function with high temperat-

ure – Eco pyrolysis (It varies depending

on the product model. It may not be

available on your product.)

üIf your oven is not very dirty, we recom-

mend using the "Pyrolysis - economy

mode" function. "Pyrolysis - economy

mode" function takes less time than

the Pyrolysis" function. If the oven is

very dirty, the "Pyrolysis - economy

mode" function may not be sufficient.

In this case, clean it by the "Pyrolysis"

function.

1. Remove all accessories inside the oven.

In the models with wire shelves, remem-

ber to remove the wire shelf.

2. Before starting the cleaning, clean the

outer surfaces of the oven and the food

residues inside the oven with soapy

cloth.

3. Select the “pyrolysis” (Pyrolysis) func-

tion.

ðThe “P2:00” and “Pro” message is

shown on the display for approx. 2

seconds and then the P2:00 mes-

sage starts to flash.

4. Tap the or key.

ðThe “ECO” message is shown on

the display for approx. 2 seconds

and then the P1:30 message starts

to flash.

5. Turn the temperature knob to the

highest "max" (maximum) temperature.

6. When the pyrolysis function is started,

P1:30 lights up and starts counting

down. The pyrolysis time (1.5 hours) is

shown on the display. This time is un-

changeable.

7. When the oven reaches a certain tem-

perature after the pyrolysis process

starts, the symbol appears on the

timer display and the oven door cannot

be opened. Do not force the handle to

unlock the door until the cleaning pro-

cess is finished and the lock symbol dis-

appears from the display.

8. When the cleaning process is finished,

"End" appears on the display.

9. After "End" appears on the display, turn

the function and temperature knobs to 0

(off) position to end the process.

10.When the symbol disappears on the

display, remove the remaining deposits

with vinegar water.

11.Touch any key to stop the audible warn-

ing.

After the pyrolysis function is com-

pleted, the door lock will be active

until the oven cools to the appropri-

ate temperature. If you want to

cook at this time, "H” will appear

on the display and cooking will not

be possible.

7.7 Cleaning the Oven Door

You can remove your oven door and door

glasses to clean them. How to remove the

doors and windows is explained in the sec-

tions "Removing the oven door” and "Re-

moving the inner glasses of the door".

After removing the door inner glasses,

clean them using a dishwashing detergent,

warm water and a soft cloth or sponge and

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO BBIM17300BMPEF Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info