Bedienungsanleitung BEKO BBIMA13301XMP (Seite 33 von 40) (Englisch)

817033

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

EN / 33

• If the surface is heavily soiled, apply the

cleaning agent on the stain with a sponge

and wait a long time for it to work prop-

erly. Then clean the glass surface with a

wet cloth.

• Discolorations and stains on the glass

surface are normal and not defects.

Plastic parts and painted surfaces

• Clean plastic parts and painted surfaces

using dishwashing detergent, warm wa-

ter and a soft cloth or sponge and dry

them with a dry cloth.

• Do not use hard metal scrapers and ab-

rasive cleaners. They may damage the

surfaces.

• Ensure that the joints of the components

of the product are not left damp and with

detergent. Otherwise, corrosion may oc-

cur on these joints.

7.2 Cleaning Accessories

Do not put the product accessories in a

dishwasher unless otherwise stated in the

user’s manual.

Frying grill (Airfry) cleaning

You can wash the basket part of the frying

grill in the dishwasher. Intensive wash in

the lower basket of the dishwasher is re-

commended for the basket. The wire frame

where the basket is inserted is not suitable

to be washed in dishwasher. Clean the wire

frame using dishwashing detergent, warm

water and a soft cloth or sponge and dry it

with a dry cloth.

7.3 Cleaning the Control Panel

• When cleaning the panels with knob-con-

trol, wipe the panel and knobs with a

damp soft cloth and dry with a dry cloth.

Do not remove the knobs and gaskets un-

derneath to clean the panel. The control

panel and knobs may be damaged.

• While cleaning the inox panels with knob

control, do not use inox cleaning agents

around the knob. The indicators around

the knob can be erased.

• Clean the touch control panels with a

damp soft cloth and dry with a dry cloth.

If your product has a key lock feature, set

the key lock before performing control

panel cleaning. Otherwise, incorrect de-

tection may occur on the keys.

7.4 Cleaning the inside of the oven

(cooking area)

Follow the cleaning steps described in the

"General Cleaning Information" section ac-

cording to the surface types in your oven.

Cleaning the side walls of the oven

The side walls in the cooking area can only

be covered with enamel or catalytic walls. It

varies by model. If there is a catalytic wall,

refer to the “Catalytic surfaces” section for

information.

If your product is a wire shelf model, re-

move the wire shelves before cleaning the

side walls. Then complete the cleaning as

described in the "General Cleaning Informa-

tion" section according to the side wall sur-

face type.

To remove the side wire shelves:

1. Remove the front of the wire shelf by

pulling it on the side wall in the opposite

direction.

2. Pull the wire shelf towards you to re-

move it completely.

3. To reattach the shelves, the procedures

applied when removing them must be

repeated from the end to the beginning,

respectively.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO BBIMA13301XMP Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info