Bedienungsanleitung BEKO BBIMM13300DXMPSEF (Seite 33 von 84) (Deutsch, Englisch)

816841

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

EN / 33

7.6 High temperature self-cleaning

The oven is equipped with a pyrolysis fea-

ture. The oven heats up to a temperature of

approximately 420-480 °C and burns until

the existing dirt turns to ash. A strong

smoke may be generated. Provide good

ventilation. High-temperature cleaning

should be performed after approximately

every 10 uses of the oven.

General warnings

Hot surfaces cause burns!

Do not touch the product during

self-cleaning and keep children

away from the product. Wait at

least 30 minutes before removing

the residue.

• Before using the pyrolysis function, re-

move all accessories, the telescopic

shelf and the side shelves (if any). If not

removed, the accessories and side wire

shelves will be damaged.

• If your product has a pyro proof access-

ory (resistant to high temperature self-

cleaning), you do not need to remove

these accessories from the oven.

Whether your accessories are pyro-proof

or not is specified in the accessories sec-

tion. If not specified, your accessories

are not resistant to high temperatures. It

must be removed from the oven before

cleaning to avoid damage.

• Do not clean the door seal. The glass

fiber seal is very delicate and easily dam-

aged. If the door seal is damaged, re-

place it with a new one from an author-

ized service.

To start the pyrolysis function:

1. Remove all accessories inside the oven.

In the models with wire shelves, remem-

ber to remove the wire shelf.

2. Before starting the cleaning, clean the

outer surfaces of the oven and the food

residues inside the oven with soapy

cloth.

3. Select the “pyrolysis” (Pyrolysis) func-

tion.

ðThe “P2:00” flashes on the display.

If your appliance is equipped with

the Eco pyrolysis function, the

“Pro” message is displayed on the

display for 2 seconds first, and

then the P2:00 message starts to

flash.

If the “Pro” and then the “ECO”

messages are not shown on the

display, your appliance is not

equipped with the Eco pyrolysis

function.

4. Turn the temperature knob to the

highest "max" (maximum) temperature.

5. When the pyrolysis function starts,

“P2:00” lights up and starts counting

down. The pyrolysis time (2 hours) is

shown on the display. This time is un-

changeable.

6. When the oven reaches a certain tem-

perature after the pyrolysis process

starts, the symbol appears on the

timer display and the oven door cannot

be opened. Do not force the handle to

unlock the door until the cleaning pro-

cess is finished and the lock symbol dis-

appears from the display.

7. When the cleaning process is finished,

"End" appears on the display.

8. After "End" appears on the display, turn

the function and temperature knobs to 0

(off) position to end the process.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO BBIMM13300DXMPSEF Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO BBIMM13300DXMPSEF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info