Bedienungsanleitung BEKO BDFN26441WC (Seite 33 von 44) (Englisch)

816954

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

33/EN

Super Rinse Function

(Depends on model)

Depending on the type of the detergent

used, if a detergent dissolving issue is

encountered it will remove the resulting

stains from the dishes and enables the

optimum rinsing performance.

Selecting this function extends the

program period.

The program may be used as Pot

Washing or Bottle Washing functions

as per your selection.

EverClean Filter

(depends on the model)

With this function, your micro filter will be

cleaned by a special system at the end of

washing cycle and it is made ready for use

for the next usage of the machine. This

cleaning process increases the cleaning

period of the micro filter from 2 weeks to

3 months and thus boosts the washing

performance. Employing this function in

every washing cycle is recommended in

order to get the most out of it.

Delay function

(depends on the model)

If there is an economic electricity tariff in

your area, you can use the delay function

to wash your dishes at respective hours.

You may delay the start time of the selected

program up to 24 hours.

Child (Key) Lock Function

(Depends on the Model)

You may prevent other persons from

affecting and changing the program flow

and delay time during the operation of the

machine.

To activate the child lock:

1. Press and hold the P4 and P5 program

buttons simultaneously to enable the

Child (Key) Lock function, when the

door is closed.

2. Child (Key) Lock indicator is illuminated

and the key lock shall be activated.

IonGuard function

(depends on the model)

IonGuard function is enabled at regular

intervals and prevents the formation of

bad odours due to putrefaction. If this

function is selected, it will be activated

while the product is turned off and the

IonGuard indicator on the panel will flash.

A ventilation noise can be heard, this

is normal. Until the function selection is

disabled, system is automatically activated

intermittently.

1. With the door closed, press the delay

button after selecting the washing

program and other additional functions.

2. When you press the Delay button, “1h”

is displayed on the Display Information

Line and the Delay indicator starts

flashing.

3. Set the time you want by pressing the

delay button. Each time you press

the button, the time increases in 1

hour increments up to 24 hours. Long

pressing the delay button triggers

continuous hour increment.

4. Press the Start/Pause/Cancel key.

Program will start automatically when

the delay period is over.

Changing the settings with the delay

function is enabled

While the delay function is active, you

cannot make changes in the washing

program, additional functions or delay time.

Once the program has started, the

program and auxiliary functions cannot

be set/changed.

To cancel the delay function:

With the door closed, press the Program

Selection/Program Cancellation button

for 3 seconds. When the delay function

is disabled, you will return to the program

selection mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO BDFN26441WC Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO BDFN26441WC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info