Bedienungsanleitung BEKO BDIN38530C (Seite 34 von 44) (Englisch)

797138

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

34/EN

Changing SelfDry Settings

1. Press the Delay and Start/Pause/

Cancel key simultaneously for 3

seconds after turning on your machine.

2. Press the Delay key until 3 hours delay

indicator is illuminated in the menu.

Using the function keys, set the SelfDry

function on or off. Function is off when

the first cycle indicator is illuminated,

and it is turned on when the second

cycle indicator is illuminated.

3. Turn off your machine with the On/Off

key to save the setting.

EverClean Filter

(depends on the model)

With this function, your micro filter will be

cleaned by a special system at the end of

washing cycle and it is made ready for use

for the next usage of the machine. This

cleaning process increases the cleaning

period of the micro filter from 2 weeks to

3 months and thus boosts the washing

performance. Employing this function in

every washing cycle is recommended in

order to get the most out of it.

3. Set the desired time by pressing the

Time Delay key. Each press on the key

will increase up to 9 hours with 3-hour

increments.

4. Close the door of your machine after

setting the Time Delay. Once the delay

time is over, the selected programme

will start automatically.

The time delay will start countdown

with the closing of the door after

selecting the Time Delay function.

If the door is opened while the Time

Delay function is active, the countdown

will be paused and start icon will start

to flash.

Changing the settings while Time

Delay function is active

While the Time Delay function is activated,

you cannot make changes in the washing

programme, auxiliary functions or the

duration of time delay.

Auxiliary functions cannot be set after

the programme has started.

To cancel the time delay function

To cancel the process while the Time Delay

function is active the programme should be

canceled.

Time delay function cannot be set after

the programme has started.

Starting the programme

Close the door of your machine to start it

after selecting the programme and auxiliary

functions.

Your machine performs water softening

depending on the hardness level of the

mains water. Washing time can change

while the programme is running

depending on the ambient temperature

where your machine is installed,

temperature of the supply water and

amount of the dishes.

Programming the washing time

Time Delay

If an economical electricity tariff is applied

in your region, you can use the time

delay function to wash your dishes during

appropriate hours.

You can delay the start of the selected

programme up to 9 hours.

Hold the delayed start key pressed for

1 second more than the other keys.

1. Press the time delay key after selecting

the washing programme and other

auxiliary functions.

2. Once you press the Time Delay key "3

hours" Time Delay indicator will start

flashing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO BDIN38530C Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO BDIN38530C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info