Bedienungsanleitung BEKO BDUN28O40X (Seite 35 von 45) (Englisch)

816988

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

35/EN

Floor illumination

Warning to show that machine is in

washing phase

(depends on the model)

Your machine reflects a light to the floor

during the washing process. This light turns

off after the washing process is complete.

Floor illumination is activated

automatically when the washing

programme starts and remains lit until

the end of the programme.

Floor illumination cannot be cancelled

by the user.

EverClean Function

(depends on the model)

When you activate this function, your micro-

filter is cleaned with a special system at the

end of the washing cycle and is ready for

the next use. With this cleaning process,

the cleaning period of the micro-filter can

be increased from 2 weeks to 3 months

and the washing performance is improved.

In order to use this function effectively, it is

recommended to use it in every washing

cycle.

There are two options for this function,

"Enabled" and "Disabled".

To change the filter cleaning setting:

1. When the door is closed, after

turning on your machine with the On/

Off button, enter the Sub-Menu by

pressing the On-Off and P2 program

buttons simultaneously for 3 seconds.

2. Press the P2 program button, and go to

the "F:" position on the display. At the

same time, the filter cleaning function

indicator is activated on the display.

3. Select "F:0" or "F:1" position using

the P3 button. Filter cleaning function

is enabled at "F: 1" position, and is

disabled at "F: 0" position.

4. Exit the settings menu by pressing

the On/Off button for 3 seconds. Your

settings will be saved automatically.

IonGuard function

(depends on the model)

IonGuard function is enabled at regular

intervals and prevents the formation of

bad odours due to putrefaction. If this

function is selected, it will be activated

while the product is turned off and the

IonGuard indicator on the panel will flash.

A ventilation noise can be heard, this

is normal. Until the function selection is

disabled, system is automatically activated

intermittently.

Starting of the program

Close the door to start your machine after

selecting the program and additional

functions.

Machine softens the water as per

the hardness of the mains water. The

washing period may change while the

program is being executed depending

on the room temperature, mains water

temperature and the amount of dishes.

Care to avoid opening of the door

while the machine is being operated.

Be careful as steam may come

out when you open the door of the

machine.

To ensure that the water remaining

on the dishes and inside the machine

is completely drained and that the

water softener is removed after rinsing

operation, your machine resumes

operation at drying cycle after keeping

silent for a while.

Cancelling (Resetting) the

program

With the door closed, press the Start/

Pause/Cancel button for 3 seconds. Display

shows 0:01 after a 3 - 2 - 1 countdown.

Wait for discharge to complete. The

discharge is completed within 2 minutes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO BDUN28O40X Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO BDUN28O40X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info