Bedienungsanleitung BEKO CN 228230 (Seite 18 von 56) (Deutsch, Englisch, Holländisch, Französisch)

556417

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

What, if....

1- The appliance will not work, even

though it is switched on.

• Check if the power cable is properly connected!

• Check if the mains supply is in order, or if a

circuit breaker has been tripped!

• Check the temperature control for correct

setting!

2- There is a power failure.

Keep the doors of your device

closed. Frozen food

will not be affected if the power failure lasts less

than the ‘Conservation Time From Failure” (hours)

declaration mentioned in the Technical Features

leaflet. If the power failure lasts longer, check the

food and consume it immediately.

You can also cook the defrosted food and then re-

freeze it.

3- The interior light does not work.

Check the power supply!

Check the installation of the light bulb! Unplug

the power cable before checking the light bulb.

(Also see the section “Replacing the interior light”)

4- There is high temperature alarm

If the actual temperature of the freezer

compartment is warm then the alarm icon on the

display (Fig. 2/12) lights on. The alarm icon lights

off when the actual temperature of the freezer

compartment cools down.

The high temperature alarm may rise up due

following situations.

a) Warm food storage

b) Warm air in the freezer compartment

c) Freezer door is left open for a long time

If the high temperature alarm remains on for more

than 24 hours then contact with the customer

service.

The high temperature alarm is not active in

24 hours after plugging the appliance into the

electricity.

There is error messages and alarm

Incase any failure condition due wiring connection

of the appliance occurs, and then the alarm icon

on the display (Fig. 2/12) starts blinking together

with the relevant error message.

Incase some certain characters (E0, E3, ..etc.)

appear on the display then contact with the

customer service.

The alarm icon lights off just after the removal of

the failure.

6- There is actual fridge temperature failure

The appliance performs cooling considering the

fridge set temperature. The actual fridge

temperature shown on the display will reach the

adjusted fridge set temperature, when the

packages are cold enough.

There may be some oscillations on the actual

fridge temperature shown on the display due;

a) The fridge door is Opened / Closed frequently

b) Loading warm packages inside the fridge.

c) Leaving the fridge door open for a long period

of time

7- Other possible malfunctions

Not every malfunction is a case for our customer

service. Very often, you can easily resolve the

problem without requesting service.

Before requesting service, please check if the

malfunction has been caused by an operating

error. If this is the case, and a service has been

requested, a service charge will be levied even if

the device is still under guarantee.

If the problem persists please contact your dealer

or customer service.

Please have the type and serial number of your

device when calling. The rating label is located

inside.

EN Instruction for use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO CN 228230 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info