Bedienungsanleitung BEKO DCB 93166 R (Seite 24 von 32) (Englisch)

757705

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

24 / EN Dryer / User Manual

Canceling the end duration function

If you want to cancel the end duration setting

countdown and start the Programme right

away:

1. Cancel the Programme by pressing the

On/O button. Turn on the drying ma-

chine again by pressing the On/O but-

ton. When your drying machine turns

on for the rst time, it turns on with the

declaration (cotton wardrobe dryness)

Programme.

2. Select the Programme you desire using

the Programme Selection knob.

3. Start the Programme by pressing the

Start / Pause button.

6.11 Starting the Programme

Start the Programme by pressing the Start /

Pause button.

Start/Pause led and the Drying led light up,

indicating the Programme started. The “:” sign

in the middle of the remaining duration starts

to blink.

6.12 Child Lock

The machine features a child lock which pre-

vents the machine Programme ow from be-

ing aected when buttons are pressed during

operation.

When the Child Lock is active, all buttons ex-

cept for the On/O button are deactivated.

To activate the child lock, press the Sound

Notication button and End Duration button

simultaneously for 3 seconds.

Te child lock should be deactivated to be able

to start a new Programme after the current

Programme ends or to be able to interfere

with the current Programme. Keep the same

buttons pressed for 3 seconds again to deac-

tivate the child lock.

CThe lock led on the screen

lights up when the Child Lock is

activated.

CChild Lock deactivates when the

machine is turned off and on

again using the On/Off button.

A warning sound is heard when any button

is pressed (except for On/O button) or the

Programme Selection knob is turned while

the child lock is active.

6.13 Changing the Programme

after it is started

After the machine starts running, you can

change the Programme you selected to dry

your laundry with a dierent Programme.

1. For example, to select Extra Dry

Programme instead of the Iron Dryness,

stop the Programme by pressing the

Start / Pause button.

2. Turn the Programme Selection knob to

select the Extra Dry Programme.

3. Start the Programme by pressing the

Start / Pause button.

Adding and removing laundry in

stand-by mode

If you want to add or remove laundry after

the drying Programme starts:

1. Press the Start/Pause button to take the

machine into Stand-by mode. Drying op-

eration stops.

2. Open the loading door, add or remove

laundry and close the loading door.

3. Start the Programme by pressing the

Start / Pause button.

CThe laundry adding made after

the drying operation started may

cause the dried laundry inside

the machine to mix with the wet

laundry and the laundry to remain

damp after the operation ends..

CLaundry adding and removing can

be repeated as much as desired

during drying operation.

But this process would

continuously interrupt the drying

operation, and so would cause the

Programme duration to lengthen

and increase energy consumption.

Thus, it is recommended to add

laundry before the Programme

starts.

Operating the product

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DCB 93166 R Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info