Bedienungsanleitung BEKO DCU 7230 X (Seite 31 von 72) (Deutsch, Englisch, Holländisch, Französisch)

475431

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Time delay

If you wish to dry your clothes at a later time,

thanks to the time delay function, you can delay

the program start up to 3 hours, 6 hours or 9

hours.

1. Open the loading door and put the laundry

in.

C Make sure that all air outlets are open, door

filter is cleaned and the water tank is empty.

2. Set the drying program and, if required, the

auxiliary functions.

3. When the time programming button is

pressed once, a 3 hour delay is selected

and the relevant led lights. When the same

button is pressed again, 6 hours; and if

pressed once more, 9 hours delay will be

selected. If the time programming button

is pressed one more time, time delaying

function will be cancelled. Set the time

delay as you require.

4. Delayed operation of the selected program

is started by pressing the “Start/Pause/

Cancel” button after selecting the time

delay.

C Additional laundry may be loaded / taken

out during the time delay period.

C During the time delay period, laundry is

rotated for 4 seconds in every 10 minutes

to prevent creasing.

Canceling the time delay

If you want to cancel the time delay countdown

and start the program:

1. Press “Start/Pause/Cancel” button for

about 3 seconds.

2. Press “Start/Pause/Cancel” button to start

the program right away.

Starting the programme

1. Press “Start/Pause/Cancel” button to start

the programme.

2. Light of the “Start/Pause/Cancel” button will

turn on to indicate that the programme has

started.

Progress of program

Progress of a running program is shown

through the program follow-up indicator.

At the beginning of every program step, the

relevant indicator LED will light up and light of

the completed step will turn off.

“Drying”:

- Drying level will be illuminated during the

whole drying process until the drying degree

reaches “iron dry”.

“Iron Dry”:

- Starts to illuminate when the drying degree

reaches “iron dry” step and remains illuminated

until the next step.

“Ready to wear”:

Starts to illuminate when the drying degree

reaches “Ready to wear” step and remains

illuminated until the next step.

“Final / Anti-creasing”:

- Illuminates when the program comes to an

end and anti-creasing function is activated.

C If more than one LED light up or

flash concurrently, it means there is

malfunctioning or a failure (please see,

Solution suggestions for problems).

Changing the programme after it has

started

You can use this feature to dry your clothes

under higher or lower temperatures after your

dryer has started.

For example;

1. Press and hold the “Start/Pause/Cancel”

button for about 3 seconds to “Cancel”

the programme in order to select “Extra

Dry” programme instead of “Iron Dry”

programme.

2. Select the “Extra Dry” programme by

rotating the programme selection button.

3. Press “Start/Pause/Cancel” button to start

the programme.

C Press “Start/Pause/Cancel” button for

3 seconds to cancel the programme or

turn the programme selection knob in any

direction to end the programme while the

machine is running. Water tank and filter

cleaning warning lights turn on to warn the

user when the programme is cancelled by

pressing the “Start/Pause/Cancel” button

for 3 seconds. However, the warning

lights do not turn on when the programme

is cancelled by turning the programme

selection knob. Only the drying light turns

on and the machine remains in hold until

a new programme is selected and the

“Start/Pause/Cancel” button is pressed.

Child-proof lock of the machine should

not be active in order to perform these

two operations. If the child-proof lock is

active, deactivate it before performing these

operations.

Adding/removing laundry in standby

mode

In order to add or remove laundry after the

programme starts:

1. Press the “Start/Pause/Cancel” button to

switch the dryer to “Pause” mode. Drying

process will stop.

2. Open the door at “Pause” position and

close it again after adding or taking out

laundry.

3. Press “Start/Pause/Cancel” button to start

the programme.

C Any laundry added after the drying process

has started may cause the dried clothes in

the machine intermingle with wet clothes

and the result will be wet laundry after the

drying process is over.

C Laundry may be added or taken out

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DCU 7230 X Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info