Bedienungsanleitung BEKO DCU 7330 XB (Seite 36 von 44) (Englisch, Holländisch)

528065

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Door open

Dryer door open symbol lights up.

Time delay

With the “Time delay” function you can delay the

programme start up to 24 hours.

1. Open the loading door and put the laundry in.

2. Set the drying programme and spin speed, and if

required, select the auxiliary functions.

3. Press “Time delaying” buttons “+” and “-” to set

the desired time delay. The time delay symbol

will flash.

4. Press “Start/Pause/Cancel” button. Then the

time delay starts to count down. The Time delay

symbol lights up. Start symbol lights up.

The “:” in the middle of the displayed time delay will

start flashing.

More laundry may be loaded or taken out during

the time delay period. At the end of the time delay

countdown process, time delay symbol fades,

drying process starts and the programme duration

is displayed. The time on the display is the total of

normal drying time and delay time.

Time delay is started by pressing the start/pause/

cancel button in the exemplary figure.

Changing the delay time

If you want to change the time during the

countdown:

1. Press “Start/Pause/Cancel” button for 3 seconds

to cancel the programme. Time delay function

must be set again for the required time.

2. Press Time delay buttons “+” or “-” to set the

desired time delay.

3. Press “Start/Pause/Cancel” button. The Time

delay symbol lights up. Pause symbol fades.

Start symbol lights up.

4. The “:” in the middle of the displayed time delay

will start flashing.

Canceling the time delay

If you want to cancel the time delay countdown and

start the programme immediately:

1. Press “Start/Pause/Cancel” button for 3 seconds

to cancel the programme.

2. Then, press “Start/Pause/Cancel” button to start

the desired programme.

Starting the programme

1. Press “Start/Pause/Cancel” button to start the

programme.

2. “Start/Pause” symbol will light up to indicate

that the programme has started and “:” symbol

between the remaining time will continue

flashing.

Progress of programme

Drying

Iron

Wardrobe

(Extra)

Ventilation

Anti-

creasing

The progress of a running programme is shown

through a number of symbols on the screen.

At the beginning of each programme step, the

relevant symbol in the series of symbols will light up

and thus, all symbols will remain lit up at the end of

the programme. The symbol that is lit up at the far

right of the series of symbols indicates the step that

is being carried out.

“Drying”:

- Lights up in all programmes apart from drying and

ventilation.

“Iron Dry”:

- Starts to illuminate when the drying degree reaches

“iron dry” step and remains illuminated until the next

step.

“Cupboard Dry”:

Starts to illuminate when the drying degree reaches

“wardrobe dry” step, and remains illuminated until

the next step.

“Extra Dry”:

Starts to illuminate when the drying degree reach to

“wardrobe dry extra” step.

“Ventilation”:

- Illuminates when the programme ends.

C Anti-creasing icon will light up at the end of the

programme if anti-creasing function is active.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DCU 7330 XB Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DCU 7330 XB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info