Bedienungsanleitung BEKO DCU 7330 XS (Seite 26 von 44) (Englisch, Holländisch)

528064

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

CNever unscrew the adjustable feet from their

housings.

Electrical connection

Connect the machine to a grounded outlet

protected by a fuse of suitable capacity as stated

in the technical specifications table. Our company

shall not be liable for any damages that will arise

when the machine is used on a circuit without

grounding.

• Connection must comply with national

regulations.

• If the current value of the fuse or breaker in the

house is less than 16 Amps, have a qualified

electrician install a 16 Amp fuse.

• Power cable plug must be within easy reach

after installation.

• The voltage and allowed fuse or breaker

protection are specified in the “Technical

Specifications” section.

• The specified voltage must be equal to your

mains voltage.

• Do not make connections via extension cables

or multi-plugs.

• The main fuse and switches must have a

contact distance of minimum 3 mm.

BDamaged power cable must only be replaced by

a qualified electrician.

BIf the product is faulty, it must not be operated

unless it is repaired! There is the risk of electric

shock!

First use

• To have the product ready for operation before

calling the authorised service agent, make sure

that its location and power supply installations

are appropriate. If they are not, call a qualified

electrician to have any necessary arrangements

carried out.

• Make sure that the power connections of the

product are in accordance with the instructions

given in relevant chapters of this manual.

Disposing of packaging material

Packaging materials are dangerous to children.

Keep packaging materials in a safe place out

of reach of children. Packaging materials of

your product are manufactured from recyclable

materials. Sort and dispose of them in accordance

with recycled waste instructions. Do not dispose of

them with normal domestic waste.

Transportation of the machine

1. Unplug the machine from the mains.

2. Remove the water drain (if any) and chimney

connections.

3. Drain water remained in the machine

completely before transportation.

1. Remove the hose on the machine by pulling it out

from its end. Do not use any tools to take out the

hose.

2. Connect the special drain hose supplied with the

machine to the pipe fitting.

3. The other end of the drain hose can be directly

connected to the wastewater drain or to the

washbasin. The fitting must always be secured

in all types of connections. Your house may be

flooded if the hose gets out of its housing during

water discharge.

Important:

• The hose should be attached to a height of

maximum 80 cm.

• You must be careful not the pinch or bend the

hose.

• The end of the hose should not be bent, it should

not be stepped on and it must not be folded

between the drain and the machine.

Adjusting the feet

In order to ensure that your machine operates

more silently and vibration-free, it must stand level

and balanced on its feet. Balance the machine by

adjusting the feet.

Rotate the feet to adjust until the machine stands

level and firmly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DCU 7330 XS Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DCU 7330 XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info