Bedienungsanleitung BEKO DCU 8230 (Seite 16 von 24) (Englisch)

757614

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

16 EN

Auxiliary function

Cancel audio warning

Your dryer will give an audio warning when

the programme comes to an end. If you do

not want to hear the audio warning, press

“Cancel Audio Warning” button. The relevant

light will turn on when this button is pressed

and an audio warning will not be given when

the programme comes to an end.

C You can select this function either before

or after the programme starts.

Warning indicators

C Warning indicators may differ according

to the model of your dryer.

Filter cleaning

A warning light will turn on to remind filter

cleaning after the programme finishes.

C If the filter cleaning warning light lights up

continuously, please refer to, “Suggested

solutions for problems”.

Water tank

Warning light starts flashing when the tank is

filled with water. The dryer stops operating if

the warning light turns on when a programme

is running. Drain the water in the water tank

to restart the dryer. Press “Start/Pause/

Cancel” button to start the programme

after you have emptied the water tank. The

warning light turns off and the programme

resumes operating.

Time delay

If you wish to dry your clothes at a later time,

thanks to the time delay function, you can

delay the programme start up to 3 hours, 6

hours or 9 hours.

1. Open the loading door and put the

laundry in.

C Make sure that all air outlets are open,

door filter is cleaned and the water tank

is empty.

2. Set the drying programme and, if

required, the auxiliary functions.

3. When the time programming button is

pressed once, a 3 hour delay is selected

and the relevant led lights. When the

same button is pressed again, 6 hours;

and if pressed once more, 9 hours delay

will be selected. If the time programming

button is pressed one more time, time

delaying function will be cancelled. Set

the time delay as you require.

4. Delayed operation of the selected

programme is started by pressing

the "Start/Pause/Cancel" button after

selecting the time delay.

C Additional laundry may be loaded / taken

out during the time delay period.

C During the time delay period, laundry

is rotated for 4 seconds in every 10

minutes to prevent creasing.

Canceling the time delay

If you want to cancel the time delay

countdown and start the programme:

1. Press “Start/Pause/Cancel” button for

about 3 seconds.

2. Press “Start/Pause/Cancel” button to

start the programme right away.

Starting the programme

1. Press “Start/Pause/Cancel” button to

start the programme.

2. Light of the “Start/Pause/Cancel”

button will turn on to indicate that the

programme has started.

Progress of programme

Progress of a running programme is shown

through the programme follow-up indicator.

At the beginning of every programme step,

the relevant indicator LED will light up and

light of the completed step will turn off.

“Drying”:

- Drying level will be illuminated during the

whole drying process until the drying degree

reaches “iron dry”.

“Iron Dry”:

- Starts to illuminate when the drying

degree reaches “iron dry” step and remains

illuminated until the next step.

“Cupboard dry”:

Starts to illuminate when the drying degree

reaches “Ready to wear” step and remains

illuminated until the next step.

“Final / Anti-creasing”:

- Illuminates when the programme comes

to an end and anti-creasing function is

activated.

C If more than one LED light up or

flash concurrently, it means there is

malfunctioning or a failure (please see,

Solution suggestions for problems).

Changing the programme after it

has started

You can use this feature to dry your clothes

under higher or lower temperatures after your

dryer has started.

For example;

1. Press and hold the “Start/Pause/Cancel”

button for about 3 seconds to “Cancel”

the programme in order to select “Extra

Dry” programme instead of “Iron Dry”

programme.

2. Select the “Extra Dry” programme by

rotating the programme selection button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DCU 8230 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info