Bedienungsanleitung BEKO DCU 8233 MM (Seite 38 von 44) (Deutsch, Englisch)

757609

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

38 Dryer / User Manual

CNOTE

• You can add or remove laundry within

end time. Displayed time is the sum of

normal drying time and end time. End

Time LED will turn off at the end of

countdown, drying starts and drying LED

will illuminate.

Changing the end time

If you want to change the duration during the

countdown:

Cancel the program by turning the On/Off/

Program selection knob. Select the program

you want and repeat the End Time selection

process.

Cancelling the end time function

If you want to cancel the end time countdown

and start the program immediately:

Cancel the program by turning the On/Off/

Program selection knob. Select the program

you want and press the Start/Stand-by button.

5.6 Warning indicators

CNOTE

• Warning indicators may vary depending

on the model of your dryer.

Filter cleaning

When the program is completed, the warning

indicator for filter cleaning turns on.

Water tank

When the program is completed, the warning

indicator to empty the water tank turns on.

If the water tank fills up while the program

continues, the warning indicator starts flashing

and the machine goes into stand-by. In this

case, empty the water tank and start the

program by pressing the Start / Stand-by

button. Warning indicator turns off and program

resumes.

Filter drawer /Heat exchanger cleaning

When the programme is finished, the cleaning

symbol of the heat exchanger or filter drawer

may light up.

5.7 Starting the program

Press the Start/Stand-by button to start the

program.

Start/Stand-by and Drying indicators will

illuminate to indicate that program started.

5.8 Child Lock

The drying machine has a child lock which

prevents the program flow from being

interrupted when the buttons are pressed

during a program. When the child lock is

activated, all buttons on the panel except

the On/Off/Program selection knob are

deactivated.

Press the Drying Level and Buzzer buttons

simultaneously for 3 buttons to activate the

child lock.

The child lock has to be deactivated to be

able to start a new program after the current

program is finished or to be able to interfere

with the program. To deactivate the child lock,

keep the same buttons pressed for 3 seconds.

CNOTE

• When the child lock is activated, the child

lock warning indicator on the screen

turns on.

• Child lock deactivates when the drying

machine is turned off and on by the On/

Off/Cancel knob.

CNOTE

• When the drying machine runs and

the child lock is active, it beeps twice

when the program selection knob is

turned. If the child lock is deactivated

without returning the program selection

knob to its previous position, program

will terminate due to the change in the

program selection knob position.

5.9 Changing the program after it is

started

You can change the program you selected to

dry your laundry with a different program after

the drying machine starts running

• For instance, select Extra Dry program

by turning the On/Off/Program selection

knob to select Extra Dry instead of Iron

Dry.

• Press the Start/Stand-by button to start

the program.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DCU 8233 MM Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DCU 8233 MM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info