Bedienungsanleitung BEKO DFN16310S (Seite 48 von 51) (Englisch)

676778

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

46 Dishwasher / User’s Manual/49 EN

Troubleshooting

• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole

while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing

the filling process. Run the prewash programme to remove the salt that spilled inside

the machine. Since the salt granules that will remain under the lid will dissolve during

prewash, causing the lid loosen, check the lid once again at the end of the programme.

There is a different odour in the machine

A new machine has a peculiar odour. It will fade out after a couple of washes.

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system

regularly as illustrated in section “Cleaning and Care”.

• Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start the

machine right after you have put the dishes into it, remove the remnants on the dishes

and run the Prewash programme without detergent every 2 days. In such cases, do not

close the door of the machine completely in order to avoid odour build up in machine.

You can also use commercially available odour removers or machine cleaners.

Rust, discoloration or surface deterioration occurs on dishes

• Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces.

Pay attention not to spill salt around the salt filling hole while adding salt. Make sure

that the salt reservoir lid is tightly closed after finishing the filling process. Run the

prewash programme to remove the salt that spilled inside the machine. Since the salt

granules that will remain under the lid will dissolve during prewash, causing the lid

loosen, check the lid once again at the end of the programme.

• Salty food remnants have remained on dishes for a long time. >>> If cutlery soiled

with such foods will be kept waiting in machine, dirt must be removed by prewash or

dishes must be washed without being kept waiting.

• Electric installation is not grounded. >>>Check if your machine is connected to the

actual grounding line. Otherwise, the static electric created in the product causes arcs

on the surfaces of metal items creating pores, removing the protective cover on the

surface and causing discoloration.

• Intensive cleansers such as bleaches are used. >>> Protective cover on metal surfaces

gets damaged and looses its efficiency in time when it gets in contact with cleansers

such as bleach. Do not wash your dishes with bleach.

• Metal items particularly such as knives are used for purposes other then their intended

uses. >>> Protective cover on the edges of knives may get damaged when they are

used for purposes such as opening cans. Do not use metal kitchen utensils out of their

intended uses.

• Cutlery are made of low quality stainless steel. >>> Corrosion on such items is

inevitable; they should not be washed in dishwashers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DFN16310S Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DFN16310S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info