Bedienungsanleitung BEKO DFN38535X (Seite 37 von 46) (Englisch)

676774

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Dishwasher / User’s Manual

35 / 44

Operating the product

InnerClean

This programme is recommended to be

operated on each 1-2 months for machine

cleaning and necessary hygiene. The

programme should be operated while the

machine is empty.

In order to achieve an efficient result, it is

recommended to use together with special

machine cleaning agents.

Do not use this programme to

clean dishes. As it operates in

high temperatures, it is harmful

for the dishes.

Leave your dishes in the machine

for about 15 minutes to cool

down after they are washed.

Your dishes will dry in a shorter

time if you leave the door of your

machine ajar during this period.

This process will increase the

drying effectiveness of your

machine.

Water cut-o warning

If mains water is cut or water inlet tap is turned

off the machine cannot take water in and E:02

icon will flash on the programme indicator.

As long as the problem continues, washing

programme is paused and the water inlet is

checked regularly by the machine; when the

water is restored E:02 icon will disappear after a

while and the washing programme resumes.

Overowng warnng

If the machine intakes too much water or there

is leakage at any of the components then

the machine will detect this and E:01 icon will

flash on the Programme indicator. As long as

the overflowing continues safety algorithm

will be active and try to discharge the water. If

overflowing stops and safety is assured, E:01

icon will disappear. If E:01 does not disappear,

there is a permanent fault. In this case the

authorised service should be contacted.

Adjustng the amount of

rnse ad

1. After turning on the machine, press Time

Delay and P+ keys simultaneously. Keep

them pressed until the countdown 3, 2, 1

is completed on the display.

2. Press P+ to move to position P on the

display.

3. Set to the appropriate level with the Time

Delay key.

4. Turn off the machine with On/Off key to

save the changes.

No rinse aid dispensed in P:0 wash position.

1 dose of rinse aid is dispensed in P:1 position.

2 doses of rinse aid are dispensed in P:2

position.

3 doses of rinse aid are dispensed in P:3

position.

4 doses of rinse aid are dispensed in P:4

position.

Rinse Aid indicator ( )

Please check the rinse aid indicator on the

display to see whether there is adequate

amount of rinse aid in the dishwasher or

not. You need to refill the rinse aid reservoir

with rinse aid whenever rinse aid warning

indicator appears on the display of your

machine.

End of programme

End of Programme indicator will light up

once the washing programme is over.

1. Press the On/Off button to turn off your

machine.

2. Close the tap.

3. Unplug the machine from the socket.

For energy saving, the product

is automatically turned off

following the completion of the

programme or if the programme

is not started.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DFN38535X Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DFN38535X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info