Bedienungsanleitung BEKO DH 8533 GA0 (Seite 53 von 64) (Deutsch, Englisch)

676666

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

53 / EN

Dryer / User Manual

Operating the product

Canceling the end duration function

If you want to cancel the end duration

setting countdown and start the program

right away:

1. Cancel the program by pressing the On/

Off button. Turn on the drying machine

again by pressing the On/Off button.

When your drying machine turns on

for the first time, it turns on with the

declaration (cotton wardrobe dryness)

program.

2. Select the program you desire using the

Program Selection knob.

3. Start the program by pressing the Start /

Pause button.

5.11 Starting the program

Start the program by pressing the Start /

Pause button.

Start/Pause led and the Drying led light up,

indicating the program started. The “:” sign in

the middle of the remaining duration starts

to blink.

5.12 Child Lock

The machine features a child lock which

prevents the machine program flow from

being affected when buttons are pressed

during operation.

When the Child Lock is active, all buttons

except for the On/Off button are deactivated.

To activate the child lock, press the Sound

Notification button and End Duration button

simultaneously for 3 seconds.

Te child lock should be deactivated to be

able to start a new program after the current

program ends or to be able to interfere with

the current program. Keep the same buttons

pressed for 3 seconds again to deactivate the

child lock.

The lock led on the screen

lights up when the Child Lock is

activated.

Child Lock deactivates when the

machine is turned off and on

again using the On/Off button.

A warning sound is heard when any button

is pressed (except for On/Off button) or the

Program Selection knob is turned while the

child lock is active.

5.13 Changing the program

after it is started

After the machine starts running, you can

change the program you selected to dry your

laundry with a different program.

1. For example, to select Extra Dry program

instead of the Iron Dryness, stop the

program by pressing the Start / Pause

button.

2. Turn the Program Selection knob to

select the Extra Dry program.

3. Start the program by pressing the Start /

Pause button.

Adding and removing laundry in

stand-by mode

If you want to add or remove laundry after

the drying program starts:

1. Press the Start/Pause button to take

the machine into Stand-by mode. Drying

operation stops.

2. Open the loading door, add or remove

laundry and close the loading door.

3. Start the program by pressing the Start /

Pause button.

The laundry adding made after

the drying operation started may

cause the dried laundry inside

the machine to mix with the wet

laundry and the laundry to remain

damp after the operation ends..

Laundry adding and removing can

be repeated as much as desired

during drying operation.

But this process would

continuously interrupt the

drying operation, and so would

cause the program duration

to lengthen and increase

energy consumption. Thus, it is

recommended to add laundry

before the program starts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DH 8533 GA0 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DH 8533 GA0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info