Bedienungsanleitung BEKO DH87331BD (Seite 43 von 48) (Deutsch, Englisch)

757661

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Dryer / User Manual

7 Troubleshooting

Drying operation takes too long.

Fibre filter pores might be clogged. >>> Wash the filter with warm

water.

Filter drawer might be clogged. >>> Clean the sponge and filter

cloth (if any) in the filter drawer. (for the products with a heat pump)

The condenser might be blocked. >>> Wash the condenser.(for

the products with a condenser )

The ventilation grills in front of the machine may be closed. >>>

Remove any objects in front of the ventilation grills that blocks air.

Ventilation may be inadequate because the area the machine is

installed in is too small. >>> Open the door or windows to prevent

the room temperature from rising very high.

A lime layer may have accumulated on the humidity or temperature

sensors. >>> Clean the humidity or temperature sensors.

Excessive amount of laundry might be loaded. >>> Do not load

the drying machine excessively.

Laundry might not have been wrung adequately. >>> Perform a

higher speed wringing on the washing machine.

Clothes come out damp after drying.

A program not suitable for the laundry type may have been

used.>>> Check the maintenance labels on the clothes and select

a program suitable for the clothes’ type or use time programs as

extra.

Fibre filter pores might be clogged. >>> Wash the filter with warm

water.

The condenser might be blocked. >>> Wash the condenser. (for

the products with a condenser)

Filter drawer might be clogged. >>> Clean the sponge and filter

cloth (if any) in the filter drawer.(For the products with a heat pump)

Excessive amount of laundry might be loaded. >>> Do not load

the drying machine excessively.

Laundry might not have been wrung adequately. >>> Perform a

higher speed wringing on the washing machine.

Drying machine does not turn on or program cannot be started.

Drying machine does not run after it is configured.

Power plug might be unplugged. >>> Make sure the power cord

is plugged in.

Loading door might be open. >>> Ensure that the loading door is

properly closed.

A program might not be set or Start/Stand-by button might not be

pressed. >>> Check that the program is set and it is not in Stand-

by position.

Child lock may be activated. >>> Turn off the child lock.

Program terminated prematurely for no reason.

Loading door might not be closed completely. >>> Ensure that the

loading door is properly closed.

There might be a power outage. >>> Press the Start/Stand-by

button to start the program.

Water tank may be full. >>> Empty the water tank.

Clothes have shrunk, hardened or spoiled.

A program not suitable with the laundry type might have been

used. >>> Check the maintenance labels on the clothes and

select a program suitable for the clothes.

The lighting inside the drying machine does not turn on. (For

models with a lamp)

Drying machine might not be turned on with the On/Off button or

program might not be selected for machines without an On/Off

button. >>> Make sure that the drying machine is turned on.

Lamp might be malfunctioning. >>> Contact Authorized Service to

replace the lamp.

Filter cleaning warning symbol/LED is on/flashing.

Fibre filter might not be cleaned. >>> Clean the filter.

The filter slot might be clogged with lints. >>> Clean the filter slot.

A layer of fluff might have accumulated clogging up the lint filter

pores. >>> Wash the filter with warm water.

The condenser might be blocked. >>> Wash the condenser.

Water drips from the loading door.

Fibres might have gathered on the inner sides of the loading door

and the loading door gasket. >>> Clean the inner surfaces of the

loading door and the loading door gasket surfaces.

Loading door opens by itself.

Loading door might not be closed completely. >>> Push the

loading door until the closing sound is heard.

Water tank warning symbol / led is on/flashing.

Water tank may be full. >>> Empty the water tank.

Water discharge hose might have collapsed. >>> If the product is

connected directly to the water drain check the water discharge

hose.

Steam symbol is flashing.(For the products with a steam function)

Steam tank may be empty => Fill the steam tank with distilled or

condensed water.

Steam programs do not start (For the products with a steam

function)

Steam tank may be empty, steam tank warning icon may light up

on the screen => Fill the steam tank until the steam icon goes off.

Wrinkles are not removed with wrinkle removing program. (For the

products with a steam function)

Excess amount of laundry may have been placed => Place

specified amount of laundry.

Steam application time may be selected in low level => Choose a

program with high amount of steam.

After completion of the program, the laundry may have stayed in

the machine for a long time => Take the laundry out as soon as the

program finishes, and hang it out.

Laundry odour not lessened with the odour removal program.(For

the products with an odour removal program)

Excess amount of laundry may have been placed => Place

specified amount of laundry.

Steam application time may be selected in low level => Choose a

program with high amount of steam.

AWARNING!

• If the problem persists after following the

instructions in this section, contact your vendor

or an Authorized Service. Never try to repair your

product yourself.

CNOTE

• In an event that you encounter an issue on

any part on your appliance, you can ask for a

replacement by contacting the authorized service

with the appliance model number.

• Operating the appliance with non-authentic parts

may lead the appliance to malfunction.

• Manufacturer and distributor are not liable for

malfunctions resulting from using non-authentic

parts.

BEKO DH87331BD Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DH87331BD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info