Bedienungsanleitung BEKO DHY9P46 (Seite 15 von 28) (Englisch)

757689

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Dryer / User Manual

CNOTE!

• You can select this function before the

program starts or after the program

starts.

Low temperature

You can activate this function only prior to start

of a program. You can activate this function

if you want to dry your laundry at a lower

temperature. The program duration will be

longer after it becomes activated.

End time

You can delay the end time of the program up

to 24 hours with end time function.

1.Open the loading door and place the laundry.

2.Select the drying program.

3.Press the End Time selection button and set

the delay time you wish. End Time LED turns

on. (When pressed and hold the button, End

Time proceeds non-stop).

4.Press the Start / Stand-by button. End Time

countdown begins. The “:” sign in the middle of

displayed delay time flashes.

CNOTE!

• You can add or remove laundry within

end time. Displayed time is the sum

of normal drying time and end time.

End Time LED turns off at the end of

countdown, the drying starts and the

drying LED turns on.

Changing the end time

If you want to change the duration during the

countdown:

Turn the On/Off/Program Selection button

and cancel the program. Select the desired

program and repeat the End Time selection.

Cancelling the end time function

If you want to cancel the end time countdown

and start the program immediately:

Turn the On/Off/Program Selection button

and cancel the program. Select the desired

program and press the “Start/Stand-by”

button.

Drum Light

You can turn on and off the drum light by

pressing this button. The light turns on when

the button is pressed and turns off after certain

time.

5.6 Warning indicators

CNOTE!

• Warning indicators may vary depending

on the model of your drying machine.

Filter cleaning

When the program is completed, the warning

indicator for filter cleaning turns on.

Water tank

If the water tank fills up while the program

continues, the warning indicator starts flashing

and the machine goes into stand-by. In this

case, empty the water tank and start the

program by pressing the Start / Stand-by

button. Warning indicator turns off and program

resumes.

Cleaning of filter drawer/

heat exchanger

Warning symbol flashes periodically to remind

that filter drawer must be cleaned.

5.7 Starting the program

Press the Start/Stand-by button to start the

program.

Start/Stand-by and Drying indicators turn on to

show that program started.

5.8 Child Lock

The drying machine has a child lock which

prevents the program flow from being

interrupted when the buttons are pressed

during a program. When the Child Lock is

activated, all buttons on the panel except the

On/Off/Program Selection button are

deactivated.

Press the Audible Warning button for 3

seconds in order to activate the child lock.

The child lock has to be deactivated to be

able to start a new program after the current

program is finished or to be able to interfere

with the program. To deactivate the child lock,

keep the same buttons pressed for 3 seconds.

CNOTE!

• When the child lock is activated, the child

lock warning indicator on the screen

turns on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DHY9P46 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info