674244
15
Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
Dishwasher / User’s Manual
13 / 49
EN
Preparation
Use the test strip supplied with the product according to the steps given below to
determine hardness level of your supply water.
a b
c
d e f
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
1 Second
1 Minute
1 min.
After determining hardness level of the supply water:
1. Switch on the machine and press the Time Delay and P keys simultaneously. Hold
the keys pressed until entering the Settings menu. Rinse Aid and Salt indicators (model
dependant) will flash on the display.
2. Select the salt indicator with the program key. Current regeneration level is displayed on
the display.
3. Using Time Delay key, adjust water hardness level according to the hardness of the
supply water. For correct setting please see “Water hardness level adjustment table”.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF
Water Hardness Level Indicator
0th Level
0-5 0-4 0-8
Press the Time Delay key to switch the water hardness
level to position P1.
1st Level
6-9 5-7 9-13
2nd Level
10-15 8-12 14-22
Press the Time Delay key to switch the water hardness
level to position P2.
3rd Level
16-19 13-15 23-27
Press the Time Delay key to switch the water hardness
level to position P3.
4th Level
20-24 16-19 28-34
Press the Time Delay key to switch the water hardness
level to position P4.
5th Level
25-62 20-50 35-90
Press the Time Delay key to switch the water hardness
level to position P5.
If the hardness level of the supply water is above 90 °dF or if you are using well water, then
it is recommended to use water purification devices and special filters.
If the hardness level of the supply water is below 13°dF, there is no need to use salt in your
dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates continuously
on the panel of your machine.
If the water hardness level adjustment is set to level 1, the “No salt warning indicator” will
illuminate continuously although it is not necessary to use salt. If you use salt under this
condition, salt will not be consumed and the Salt indicator will not illuminate.
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BEKO DIN15310 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BEKO DIN15310

BEKO DIN15310 Installationsanweisung - Holländisch - 13 seiten

BEKO DIN15310 Bedienungsanleitung - Holländisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info