Bedienungsanleitung BEKO DIN36430 (Seite 32 von 42) (Englisch)

757751

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

32/EN

Time delay function cannot be set after

the programme has started.

Starting the programme

Close the door of your machine to start it

after selecting the programme and auxiliary

functions.

Your machine performs water softening

depending on the hardness level of the

mains water. Washing time can change

while the programme is running

depending on the ambient temperature

where your machine is installed,

temperature of the supply water and

amount of the dishes.

Pay attention not to open the door of

the machine when it is running. There

may be a rush of vapour when you

open the door of your machine; be

careful.

After the rinsing step the machine

will wait silent in pause mode for

some time in order to have the water

remaining in the machine and on the

dishes drained completely and to have

the water softener cleaned, and then it

will resume running in drying mode.

Cancelling the programme

Press and hold the Programme Selection

/ Programme Cancel keys for 3 seconds.

Release the key as the Start indicator starts

flashing.

Once you close the door of your machine,

draining is completed in 2 minutes

and the machine gives an audible warning

when it is completed.

There might be residues of detergent

or rinse aid left in the machine and/or

on the pieces being washed depending

on the step in which the programme

has been cancelled.

Programming the washing time

Time Delay

If an economical electricity tariff is applied

in your region, you can use the time

delay function to wash your dishes during

appropriate hours.

You can delay the start of the selected

programme until 9 hours.

Hold the delayed start key pressed for

1 second more than the other keys.

1. Press the time delay key after selecting

the washing programme and other

auxiliary functions.

2. Once you press the Time Delay key "3

hours" Time Delay indicator will start

flashing.

3. Set the desired time by pressing the

Time Delay key. Each press on the key

will increase up to 9 hours with 3-hour

increments.

4. Close the door of your machine after

setting the Time Delay. Once the delay

time is over, the selected programme

will start automatically.

The time delay will start countdown

with the closing of the door after

selecting the Time Delay function.

If the door is opened while the Time

Delay function is active, the countdown

will be paused and start icon will start

to flash.

Changing the settings while Time

Delay function is active

While the Time Delay function is activated,

you cannot make changes in the washing

programme, auxiliary functions or the

duration of time delay.

Auxiliary functions cannot be set after

the programme has started.

To cancel the time delay function

To cancel the process while the Time Delay

function is active the programme should be

canceled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DIN36430 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info