Bedienungsanleitung BEKO DIS15Q20 (Seite 31 von 41) (Holländisch)

762883

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

31/EN

Scheduling the washing time

Time Delay

If an economical electricity tariff is applied

in your region, you can use the Time

Delay function to wash your dishes during

appropriate hours.

You can delay the start of the selected

programme until 24 hours.

1. Press the Time Delay function key after

selecting the washing programme and

other auxiliary functions.

2. Once you press the Time Delay key,

Display Information Line will show

"0:30" and Time Delay indicator will

start flashing.

3. Set the desired time by pressing the

Time Delay key. Time will increase with

increments of 30 minutes up to 6 hours

and after that in 1 hour increments up

to 24 hours every time you press the

key.

4. Close the door of your machine after

setting the Delayed Start. Once

the delay time is over, the selected

programme will start automatically.

Changing the settings while Time

Delay function is active

While the Time Delay function is activated,

you cannot make changes in the washing

programme, auxiliary functions or the

duration of delay time.

Programme and auxiliary functions

cannot be set/changed after the

programme has started.

To cancel the Time Delay function

Open the door of the product Press

and hold the Programme Selection /

Programme Cancel keys for 3 seconds.

After the 3 - 2 - 1 countdown, 0:01 is

displayed, close the door of the product

and wait for the draining process complete.

Draining is completed in 2 minutes and the

machine gives an audible warning when it

is completed.

You can select and start a new

programme following the cancellation

of Time Delay function.

Time Delay function cannot be set after

the programme starts.

Starting the programme

Close the door of your machine to start it

after selecting the programme and auxiliary

functions.

Your machine performs water softening

depending on the hardness level of

the supply water. Washing time can

change while the programme is running

depending on the ambient temperature

where your machine is installed,

temperature of the supply water and

amount of the dishes.

Pay attention not to open the door of

the machine when it is running. There

may be a rush of vapour when you

open the door of your machine; be

careful.

The machine will remain silent in

pause mode for some time in order to

Interior Lighting

(depends on the model)

Some models have interior lighting to

illuminate the interior when the door is

opened.

1. After switching on your machine, press

the Settings Menu key for 3 seconds.

In some models pressing the Menu

key only for once will allow you to enter

the Settings menu.

2. Press <- and +> keys to move to the

“L:” position on the display. Select the

position you want with the Selection

key. Interior lighting is off in “L:0”

position and on in “L:1” position.

3. Switch off the machine with the On/Off

key to save the changes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DIS15Q20 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DIS15Q20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info