Bedienungsanleitung BEKO DPY 8506 GXB1 (Seite 53 von 60) (Englisch, Holländisch)

579382

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

53 / 60 EN

Dryer / User Manual

Operating the product

5.10 Starting the programme

Press the Start/Pause button to start the program.

Start symbol will light up to indicate that the

programme has started and “:” symbol in the middle

of the remaining time will keep flashing. Drying and

programme progress bar will be displayed alternately.

5.11.Progress of programme

5.12 Child Lock

Machine is equipped with a Child Lock which prevents

interfering with the current programme flow by pressing

any button.

To activate the Child Lock:

• Press and hold Childproof Lock button for 3

seconds.

• Child Lock symbol will appear on the display when

the Child Lock is activated.

• All buttons except the On/Off/Cancel and Child

Lock button on the control panel are deactivated

when the Child Lock is active.

• Display symbols will not change even if the position

of Programme Selection knob is changed while the

child lock button is active.

• When the programme selection knob is turned and

function buttons are pressed Child Lock warning

will be displayed.

• To start a new programme after the current

programme is over or to interrupt the current

programme, the Child Lock should be deactivated.

To deactivate the childproof lock:

• Press and hold Child Lock button for 3 seconds.

• Child Lock is deactivated when the dryer is

switched off and on with On/Off/Cancel button.

5.13 Changing the programme after it

has started

• After the dryer starts operation, you can change

the selected programme and dry your laundry in a

different programme.

• Press and hold Start / Pause button for 1 seconds

to pause the programme.

• Select desired programme by turning the

Programme Selection knob.

• Press the Start/Pause button to start the program.

Adding / removing laundry while the dryer is

in operation

• In order to add or take out laundry after the drying

programme has started:

• Press the Start/Pause button to switch the dryer to

Pause mode. Drying process will pause.

• While in Pause mode, open the loading door, add

or take out laundry and close the loading door.

• Press the Start/Pause button to resume the

program.

Any laundry added after the drying

process has started may cause the

clothes that are already dried in the

machine intermingle with wet clothes and

the result will be wet laundry after the

drying process is over.

You may repeat laundry adding or

removing process as many times as

you desire during drying. However, this

process will increase the programme time

and energy consumption since the drying

process will be interrupted repeatedly.

Therefore, it is recommended to add

laundry before the drying programme has

started.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DPY 8506 GXB1 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DPY 8506 GXB1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info