Bedienungsanleitung BEKO DS 7433 RX0 (Seite 71 von 75) (Deutsch, Englisch, Holländisch, Französisch)

579376

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

71 / EN

Washing Machine / User’s Manual

4.11 Starting the programme

1. Press Start / Pause button to start the programme.

2. Programme follow-up light showing the startup of the

programme will turn on.

If no programme is started or no button is pressed within

1 minute during programme selection process, the

machine will switch to Pause mode and the illumination

level of the temperature, speed and loading door indicator

lights will dim. Other indicator lights and indicators will

turn off. Once the Programme Selection knob is rotated or

any button is pressed, indicator lights and indicators will

turn on again.

4.12 Child Lock

Use Child Lock function to prevent children from tampering

with the machine. Thus you can avoid any changes in a

running programme.

If the Programme Selection knob is turned when the Child

Lock is active, "Con" appears on the display. The Child

Lock does not allow any change in the programmes and

the selected temperature, speed and auxiliary functions.

Even if another programme is selected with the

Programme Selection knob while the Child Lock is active,

previously selected programme will continue running.

To activate the Child Lock:

1. and 2. Auxiliary Function buttons are pressed and held for

3 seconds. The lights on the 1

and 2

Auxiliary Function

buttons will flash, and "C03", "C02", "C01" will appear on

the display respectively while you keep the buttons pressed

for 3 seconds. Then, "Con" will appear on the display

indicating that the Child Lock is activated. If you press any

button or turn the Programme Selection knob when the Child

Lock is active, same phrase will appear on the display. The

lights on the 1st and 2nd auxiliary function buttons that are

used to deactivate the Child Lock will blink 3 times.

To deactivate the Child Lock:

Press and hold 1

and 2

auxiliary function buttons for 3

seconds while any programme is running. The lights on the

and 2

Auxiliary Function buttons will flash, and "C03",

"C02", "C01" will appear on the display respectively while

you keep the buttons pressed for 3 seconds. Then, "COFF"

will appear on the display indicating that the Child Lock is

deactivated.

In addition to the method above, to deactivate the Child

Lock, switch the Programme Selection knob to On /

Off position when no programme is running, and select

another programme.

Child Lock is not deactivated after power failures or

when the machine is unplugged.

4.13 Progress of programme

Progress of a running programme can be followed from the

Programme Follow-up indicator. At the beginning of every

programme step, the relevant indicator light will turn on and

light of the completed step will turn off.

You can change the auxiliary functions, speed and

temperature settings without stopping the programme flow

while the programme is running. To do this, the change

you are going to make must be in a step after the running

programme step. If the change is not compatible, relevant

lights will flash for 3 times.

If the machine does not pass to the spinning step, Rinse

Hold function might be active or the automatic unbalanced

load detection system might be activated due to the

unbalanced distribution of the laundry in the machine.

4.14 Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases when

the water level is unsuitable.

Loading door light will start flashing when the machine

is switched to Pause mode. Machine checks the level of

the water inside. If the level is suitable, Loading Door light

illuminates steadily within 1-2 minutes and the loading door

can be opened.

If the level is unsuitable, Loading Door light turns off and the

loading door cannot be opened. If you are obliged to open

the Loading Door while the Loading Door light is off, you

have to cancel the current programme; see "Canceling the

programme".

4.15 Changing the selections after programme

has started

Switching the machine to pause mode

Press the Start / Pause button to switch the machine to

pause mode while a programme is running. The light of

the step which the machine is in starts flashing in the

Programme Follow-up indicator to show that the machine

has been switched to the pause mode.

Also, when the loading door is ready to be opened, Loading

Door light will also illuminate continuously in addition to the

programme step light.

Changing the auxiliary function, speed and

temperature

Depending on the step the programme has reached, you

can cancel or activate the auxiliary functions; see, "Auxiliary

function selection".

You may also change the speed and temperature settings;

see, "Spin speed selection" and "Temperature selection".

If no change is allowed, the relevant light will flash for 3

times.

Adding or taking out laundry

1. Press Start / Pause button to switch the machine to

pause mode. The programme follow-up light of the

relevant step during which the machine was switched into

the pause mode will flash.

2. Wait until the Loading Door can be opened.

3. Open the Loading Door and add or take out the laundry.

4. Close the Loading Door.

5. Make changes in auxiliary functions, temperature and

speed settings if necessary.

6. Press Start / Pause button to start the machine.

4.16 Cancelling the programme

To cancel the programme, turn the Programme Selection

knob to select another programme. Previous programme

will be cancelled. End / Cancel light will flash continuously to

notify that the programme has been canceled.

Pump function is activated for 1-2 minutes regardless of the

programme step, and whether there is water in the machine

or not. After this period, your machine will be ready to start

with the first step of the new programme.

BEKO DS 7433 RX0 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info