Bedienungsanleitung BEKO DS7436PX0 (Seite 45 von 48) (Deutsch, Englisch)

757680

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Dryer / User Manual

7 Troubleshooting

Drying operation takes too long.

Fibre filter (interior and exterior filter) pores may be clogged.

>>> Wash the fibre filters with warm water and dry.

Evaporator front side may be clogged. >>> Clean the front

side of the evaporator.

The ventilation grills in front of the machine may be closed.

>>> Remove any object in front of the ventilation grills that

blocks air.

Ventilation may be inadequate because the are the

machine is installed in is too small. >>> Open the door

or windows to prevent the room temperature from rising

very high.

A lime layer may have accumulated on the humidity

sensor. >>> Clean the humidity sensor.

Excessive amount of laundry might be loaded. >>> Do not

load the drying machine excessively.

Laundry might not have been wrung adequately. >>>

Perform a higher speed wringing on the washing machine.

Clothes come out damp after drying.

A program not suitable for the laundry type may have been

used.>>> Check the maintenance labels on the clothes

and select a program suitable for the clothes’ type or use

time programs as extra.

Fibre filter (interior and exterior filter) pores may be clogged.

>>> Wash the filters with warm water and dry.

Evaporator front side may be clogged. >>> Clean the front

side of the evaporator.

Excessive amount of laundry might be loaded. >>> Do not

load the drying machine excessively.

Laundry might not have been wrung adequately. >>>

Perform a higher speed wringing on the washing machine.

Drying machine does not turn on or program cannot be

started. Drying machine does not run after it is configured.

Power plug might be unplugged. >>> Make sure the

power cord is plugged in.

Loading door might be open. >>> Ensure that the loading

door is properly closed.

A program might not be set or Start / Pause /Cancel

button might not be pressed. >>> Check that the program

is set and it is not in Pause position..

Child lock may be activated. >>> Turn off the child lock.

Program terminated prematurely for no reason.

Loading door might be closed completely. >>> Ensure

that the loading door is properly closed.

There might be a power outage. >>> Press the Start /

Pause / Cancel button to start the program.

Water tank may be full. >>> Empty the water tank.

Clothes have shrunk, hardened or spoiled.

A program not suitable with the laundry type might have

been used. >>> Check the maintenance labels on the

clothes and select a program suitable for the clothes.

Water drips from the loading door.

Fibres might have gathered on the inner sides of the

loading door and the loading door gasket. >>> Clean the

inner surfaces of the loading door and the loading door

gasket surfaces.

Loading door opens by itself.

Loading door might be closed completely. >>> Push the

loading door until the closing sound is heard.

Water tank warning symbol is on/flashing.

Water tank may be full. >>> Empty the water tank.

Water discharge hose might have collapsed. >>> If the

product is connected directly to the water drain check the

water discharge hose.

The lighting inside the drying machine does not turn on. (In

models with lamp)

The drying machine might not have been turned on using

On/Off button. >>> Check that the drying machine is

turned on.

Lamp might be malfunctioning. >>> Contact Authorized

Service to replace the lamp.

Anti-crease icon is lit.

Anti-Crease mode that prevents the laundry in the drier

to crease may be activated. >>> Turn the drier off and

remove the laundry.

Fibre filter cleaning icon is lit.

Fibre filter (interior and exterior filter) may be unclean. >>>

Wash the filters with warm water and dry..

A layer may be formed on the fibre filter pores that leads to

clogging. >>> Wash the filters with warm water and dry.

Fibre filters may not be inserted. >>> Insert the interior and

exterior filters to their places.

An audible warning is heard from the machine

Fibre filters may not be inserted. >>> Insert the interior and

exterior filters to their places.

Evaporator warning icon is flashing.

Evaporator front side may be clogged with fibres. >>>

Clean the front side of the evaporator.

Fibre filters may not be inserted. >>> Insert the interior and

exterior filters to their places.

The lighting inside the drying machine turns on. (In models

with lamp)

If the drying machine is plugged to the power outlet, the

On/Off button is pressed and the door is open; the light

turns on. >>> Unplug the drying machine or bring the On/

Off button to Off position.

AWARNING!

• If the problem persists after following the

instructions in this section, contact your vendor

or an Authorized Service. Never try to repair your

product yourself.

CNOTE

• In an event that you encounter an issue on any part

on your appliance, you can ask for a replacement

by contacting the authorized service with the

appliance model number.

• Operating the appliance with non-authentic parts

may lead the appliance to malfunction.

• Manufacturer and distributor are not liable for

malfunctions resulting from using non-authentic

parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DS7436PX0 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info