Bedienungsanleitung BEKO DSFN 6530 X (Seite 27 von 40) (Englisch)

528152

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Program indicator 15 c lights up when

the program is over. Remaining Time

Indicator (3) displays “0:00”.

Canceling a Program

Press Start / Pause / Cancel button (2)

for three seconds to cancel a program

that is already running. Release the

button when symbol (12) start

flashing in the display. For a couple of

minutes the machine will fulfill the

necessary operations required for

cancellation. Remaining time indicator

(11) displays “0:00”. You may select

and operate a new program following

the program cancellation process.

There might be residues of detergent

or rinse aid left in the machine and/or

on the pieces being washed depending

on the step the previous program was

in at the time of such cancellation.

Changing a Program

If you want to change running program,

first of all press Start / Pause / Cancel

button (2) to switch your machine into

pause mode. Second, switch to the

desired program by pressing Program

Selection button (4). Third, Start the

new program by pressing Start / Pause

/ Cancel button (2) again. Your new

selection will resume operation from

the step in the previous program (For

example, if the previous program was

in rinsing step, the new one will also

start from the rinsing step). If you want

to run the newly selected program from

the beginning, you have to apply the

program cancellation process first and

then select a new program.

Programming the Delayed

Start

You can delay the start of the selected

program until 9 hours. Delayed start

can not be set after the program starts.

The selected program must not be

started in order to be able to set the

delay time.

Delayed start indicator sand glass

(13) will start flashing when the

delayed start button (6) is pressed. You

can set the desired time by pressing

the delayed start button (6). Press the

Start / Pause / Cancel button (2) after

setting the time. The delayed start

indicator sand glass (13) and play

icon (12) will remain lit on the display

during the delayed start countdown

and the delay time indicator (11) will

display the remaining time. Program

will start automatically when the

countdown is over.

You can use the delayed start function

if you are utilizing the economic

electricity tariff.

If you want to change the program or

functions while the delayed start

function is enabled, then pause the

machine by pressing the Start / Pause

/ Cancel button (2). You will see that

the countdown stops. The delayed start

indicator will start flashing. Select the

new program and/or add the functions

as described in Program Selection

and Table of Average Consumption

Values. Resume the delayed start

countdown by pressing the Start /

Pause / Cancel button (2).

If you want to cancel delayed start

countdown while it is in progress, then

press the Start / Pause / Cancel button

(2) for three seconds. Release the

button when symbols (12) start

flashing in the display. For a couple of

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DSFN 6530 X Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DSFN 6530 X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info