Bedienungsanleitung BEKO DSFN 6832 (Seite 27 von 41) (Englisch)

528154

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

Button and Button

Descriptions

On / Off Button (1)

When you press the On/Off button,

the display switches on with the last

program used and it dims when you

turn the machine off.

If the Half Load (5), function are

enabled during the last program used,

these functions will remain active

when the machine is turned off and on

again. If you would like to disable these

functions after turning the machine

off and on again, you must press the

relevant buttons.

Start / Pause / Cancel Button (2)

It is used to start, pause or cancel the

selected program or the delayed start

countdown. The selected program will

start running when the Start / Pause /

Cancel button (2) is pressed. When the

button is pressed, (12) lights up.

Wait for two seconds to view the full

display on the screen after you turn

on the machine by pressing the On/

Off button (1) before you press Start /

Pause / Cancel (2) button.

Program Selection Button (4)

You can select the washing program

you want to use with the aid of the

“Program Data and Table of Average

Consumption Values” after pressing

the program selection button. Number

of the selected program appears in the

program indicator (8) on the display

(3) in the format of .......

Program number will increase by one

each time you press the program

selection button. Number of the defined

programs can change depending on

the model you have purchased.

Half Load Button (5)

If you want to run your machine without

loading it completely, place your dishes

into the machine as you desire. First,

press the On / Off Button (1). Select

the desired program and press the

Half Load (5) button. You must see the

Half Load indicator (14) appearing

on the screen. Start the program by

pressing the Start / Pause / Cancel

button (2). Thanks to the Half Load

option, you can use both lower and

upper baskets of your machine and

you can save water and energy.

Delayed Start Button (6)

You can delay the start of the selected

program until 9 hours with increments

of 1 hour by means of the Delayed

Start Function.

Program Selection

You can select the desired program

after turning on the machine by

pressing the On / Off button (1).

Switch to the program you want to

operate by pressing program selection

button (4). You can follow up the

program you are in from the program

indicator (8) on the screen. Program

number will increase by one each time

you press the program selection button

(Number of the defined programs

can change depending on the model

you have purchased). The selected

washing program will start running

when the Start / Pause / Cancel button

(2) is pressed symbol (12) light up.

Time indicator (11) will start displaying

the estimated remaining time to the

end of program.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DSFN 6832 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DSFN 6832

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info