Bedienungsanleitung BEKO DSN28640X (Seite 34 von 45) (Englisch)

797193

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

34/EN

3. Set the desired time by pressing the

Time Delay key. Time will increase with

increments of 30 minutes up to 6 hours

and after that in 1 hour increments up

to 24 hours every time you press the

key.

4. Press Start / Pause / Cancel key to

start countdown for the Time Delay.

Time Delay indicator and Start / Pause

indicator will light continuously until

the end of the period. Time Delay is

displayed on the Display Information

Line. Selected programme will start as

soon as the countdown is over.

Changing the settings while Time

Delay function is enabled

While the Time Delay function is activated,

you cannot make changes in the washing

programme, auxiliary functions or the

duration of delay time.

Programme and auxiliary functions

cannot be set/changed after the

programme has started.

To cancel the Time Delay function

1. Press and hold Start / Pause / Cancel

key for 3 seconds.

2. When the Start / Pause / Cancel key is

pressed and hold, "3", "2", "1" appear

on the Display Information Line. Time

Delay indicator will turn off at the end of

the cancellation process and delaying

process is cancelled.

You can select and start a new

programme following the cancellation

of Time Delay function.

Time Delay function can not be set

after the programme starts.

Starting the programme

To start your machine after selecting the

programme and auxiliary functions, press

Start / Pause / Cancel key.

Changing SelfDry Settings

1. Press the Delay and P/P+ key

simultaneously after turning on your

machine. Keep pressing until the

countdown on the screen displayed as

3, 2, 1 is completed.

2. Press P / P+ key, and move to the o:

position on the screen. “o: 0” position

indicates that the SelfDry feature is off

“o: 1” position indicates that it is on.

Select the desired position with the

delay key.

3. Turn off your machine with the On/Off

key to save the setting.

Programming the washing time

Time Delay

If an economical electricity tariff is applied

in your region, you can use the Time

Delay function to wash your dishes during

appropriate hours.

You can delay the start of the selected

programme until 24 hours. Time Delay

cannot be set after the programme starts.

1. Press the Time Delay function key after

selecting the washing programme and

other auxiliary functions.

2. Once you press the Time Delay key,

Display Information Line will show

"0:30" and Time Delay indicator will

start flashing.

EverClean Filter

(depends on the model)

With this function, your micro filter will be

cleaned by a special system at the end of

washing cycle and it is made ready for use

for the next usage of the machine. This

cleaning process increases the cleaning

period of the micro filter from 2 weeks to

3 months and thus boosts the washing

performance. Employing this function in

every washing cycle is recommended in

order to get the most out of it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DSN28640X Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DSN28640X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info