Bedienungsanleitung BEKO ECO WMB 81445 LW (Seite 27 von 44) (Englisch)

556813

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

27 / 44 EN

Operating the product

5.13 Starting the programme

1. Press Start / Pause / Cancel button to start the

programme.

2. Start symbol showing the startup of the

programme will turn on.

3. Loading door is locked and Door Locked symbol

appears on the display.

4. The symbol of the step from which the

programme has started appears on the display

(Prewash, Main Wash, Rinse, Softener and

Spin).

5.14 Progress of programme

Progress of a running programme is indicated on

the display with a set of symbols.

Relevant symbol appears on the display at the

beginning of each programme step and all

symbols remain lit at the end of the programme.

The farthermost right symbol indicates the current

programme step.

Prewash

If the Prewash auxiliary function is selected,

Prewash symbol appears on the display indicating

that the prewash step has started.

Main Wash

Main Wash symbol indicating that the main wash

step has started appears on the display.

Rinse

Rinse symbol indicating that the rinsing step has

started appears on the display.

Softener

Softener symbol indicating that the softener step

has started appears on the display.

Spin

Appears at the beginning of the final spin step

and remains lit during Spin and Pump special

programmes.

If the machine does not pass to the

spinning step, Rinse Hold function might

be active or the automatic unbalanced

load detection system might be activated

due to the unbalanced distribution of the

laundry in the machine.

5.15 Loading door lock

There is a locking system on the loading door of

the machine that prevents opening of the door in

cases when the water level is unsuitable.

Door Locked symbol appears when the loading

door is locked. This symbol will flash until the

loading door becomes ready to open when

programme completes or the machine is paused.

Do not force to open the loading door in this step.

Symbol disappears when the door is ready to

open. You can open the door when the symbol

disappears.

5.16 Changing the selections

after programme has started

Switching the machine to pause mode

Press the Start / Pause / Cancel button to switch

the machine to pause mode. Pause symbol

appears on the display indicating that the machine

is paused. Start symbol disappears.

Changing the speed and temperature settings

for auxiliary functions

Depending on the step the programme has

reached, you may cancel or activate the auxiliary

functions; see, "Auxiliary function selection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

Adding or taking out laundry

1. Press the Start / Pause / Cancel button to

switch the machine to pause mode. The

programme follow-up light of the relevant step

during which the machine was switched into

the pause mode will flash.

2. Wait until the Loading Door can be opened.

3. Open the Loading Door and add or take out the

laundry.

4. Close the Loading Door.

5. Make changes in auxiliary functions,

temperature and speed settings if necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO ECO WMB 81445 LW Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info