Bedienungsanleitung BEKO GN1416231JXN (Seite 11 von 460) (Deutsch, Englisch, Französisch)

816725

Zoom out

Zoom in

Vorherige Seite

1/460

Nächste Seite

9 /33 EN Refrigerator / User Manual

3.1 Appropriate location

for installation

Contact an Authorized Service for the installation

of the product. In order to prepare the product

for use, refer the information in the user manual

and ensure that electrical installation and water

installation are appropriate. If not, call a qualified

electrician and technician to have any necessary

arrangements carried out.

BWARNING: Manufacturer shall not

be held liable for damages that may

arise from procedures carried out by

unauthorized persons.

BWARNING: Product must not be plugged

in during installation. Otherwise, there is

the risk of death or serious injury!

WARNING: : If the door clearance of the

room where the product shall be placed is

so tight to prevent passing of the product,

remove the door of the room and pass the

product through the door by turning it to

its side; if this does not work, contact the

authorized service.



prevent jolts.



heat sources such as hobs, heater cores and

stoves and at least 5 cm away from electrical

ovens.



and kept in humid places.



function efficiently. If the product will be placed

in an alcove, remember to leave at least 5 cm

clearance between the product and the ceiling,

rear wall and the side walls.



remember to leave at least 5 cm clearance

between the product and the ceiling, rear

wall and the side walls. Check if the rear wall

clearance protection component is present at

its location (if provided with the product). If the

component is not available, or if it is lost or

3 Installation

fallen, position the product so that at least 5 cm

clearance shall be left between the rear surface

of the product and the wall of the room. The

clearance at the rear is important for efficient

operation of the product.



temperature falls below -5°C.

3.2 Installing the plastic wedges

Plastic wedges supplied with the product are

used to create the distance for the air circulation

between the product and the rear wall.

To install the wedges, remove the screws on the

product and use the screws supplied together with the

wedges.

Insert the 2 plastic wedges onto the rear ventilation

cover as illustrated in the figure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO GN1416231JXN Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info