677663
12
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
12 / EN
Hood / User Manual
5
Cleaning and preventive maintenance
A
CAUTION:Cleaning and user service
should not be made by children who
are not under supervision.
- Surface can be damaged due to
sharp or scrubbing cleaning agents.
Never use sharp or scrubbing
cleaning agents. Procure cleaning
and protection agents proper for
your device from the authorized
service. Surface of the device and
control units are sensitive against
scratching.
Clean the surfaces with a soft, damp
cloth, dishwashing detergent or a
mild glass cleaning agent. Soften
dried and stuck soil with a damp
cloth. Do not scrape!
- Using dry clothes, sponges that
may scratch, agents that necessitate
rubbing, cleaning agents containing
sand, soda, acid or chlorine or other
strong materials is not appropriate.
- Clean stainless steel surfaces only
in the direction of grinding.
- Do not use stainless steel cleansers
and wet clothes for control units.
Cleaning metallic oil filters Used
metallic oil filters trap oily particles
contained in the humidity and steam
in the kitchen. Under normal usage
(1-2 hours daily), clean metallic oil
filters approximately every three
months.
- Do not use excessively strong,
acidic or chlorine- solution
cleansers.
- While cleaning the metallic oil filter,
clean the trapping arrangements of
metallic oil filters in the device with a
damp cloth also.
- You can clean metallic oil filters in
the dishwasher or by hand wash.
5.1 Washing in the Dishwasher
In case of dishwashing, slight discoloration may
be in question. This has no impact in terms of the
function of the metallic oil filter.
- Do not wash heavily soiled metallic oil filters
together with the dishes.
- Place the metallic oil filters in the dishwasher
loosely or freely standing. Metallic oil filters
should be placed in the dishwasher without any
compression on them.
5.2 Hand Washing
Soften the stains of the metallic oil filters in hot
dishwashing detergent water.
– Use a brush for cleaning and let the liquids on
the metal oil filters to drain completely.
– Rinse the filters well after cleaning.
You may use a special oil solvent to remove
persistent soils. You can get this product via
authorized sales center.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BEKO H102K wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info