Bedienungsanleitung BEKO HSM47530 (Seite 13 von 56) (Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

816683

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Replacing the interior light bulb

If the lamp burns out, disconnect the

appliance from the mains. Take out the

lamp trim. Make sure the lamp is

screwed correctly. Plug in the appliance

again. If the lamp still does not go on,

replace it with another one model E14-

15W. Mount back the lamp trim in its

place.

The lamp(s) used in this appliance is not

suitable for household room illumination. The

intended purpose of this lamp is to assist the

user to place foodstuffs in the

refrigerator/freezer in a safe and comfortable

way.

The lamps used in this appliance have to

withstand extreme physical conditions such as

temperatures below -20°C.

Noises during operation

In order to keep the temperature at the value

you have adjusted, the compressor of the

appliance starts periodically.

The noises which can be heard in such

situation are normal.

They are redced as soon as the appliance

reaches the operation temperature.

The humming noise is made by the

compressor. It can become a little stronger

when the compressor starts.

The bubbling and gurgling noises coming from

the refrigerant circulating in the pipes of the

appliance, are normal operating noises.

Warning !

Never try to repair yourself the appliance

or its electric components. Any repair

made by an unauthorised person is

dangerous for the user and can result in

the warranty cancellation.

Defects finding guide

The appliance

does not work.

zThere is a power failure.

zThe plug of the supply cord is not inserted

well into the socket.

zThe fuse is blown.

zThe thermostat is in

„OFF” position.

The temperatures are not low

enough

(red LED on).

zThe food prevents the door closing.

zThe ap

pliance was not placed correctly.

zThe appliance is placed too close to a heat

source.

zThe thermostat knob is not in the correct

position.

Excessive ice build

-up

zThe door was not closed properly.

The inside lighting does not work

zThe lamp is blown. Unplug the appliance

from the mains, take out the lamp and

replace it with a new one.

The following are not defects

zPossible noddings and cracks coming

from the product: circulation of the

refrigerant in the system.

EN Instruction for use

The symbol on the product or on

packaging indicates that this product may

not be treated as household waste.

Instead it shall be handed over to the

applicable collection point for the recycling

of electrical and electronic equipment. By

ensuring this product is disposed of

correctly, you will help prevent potential

negative consequences for the

environment and human health, which

could otherwise be otherwise be caused

by inappropriate waste handling of this

product. For more detailed information

about recycling of this product, please

contact your local city office, you

household waste disposal service or the

shop where you purchased the product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO HSM47530 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO HSM47530

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info