Bedienungsanleitung BEKO HTV8716XMST (Seite 36 von 44) (Englisch)

816578

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

36 / EN Washer-Dryer / User Manual

When Remote Control is enabled, you can only

manage and switch off the machine and follow

status on the washing machine. All functions

except child lock can be managed through the

application.

You can check the function indicator on the key

to follow whether the Remote Control function is

On or Off.

If the Remote Control function is Off, all the

operations are handled on the washing machine

and only status follow-up is allowed on the

application.

If the Remote Control function cannot be

enabled, you will hear a warning after pressing

the button. This might occur if the product is

switched on or if there is no product paired

through Bluetooth. Bluetooth setting being Off

or the washing machine's door being open are

examples for such cases.

When you enable this function on the washing

machine, said function will remain on except

for certain cases, allowing you to control your

washing machine remotely via Bluetooth.

In certain cases, it deactivates itself for

safety reasons:

• When your washing machine

undergoes a power interruption.

• When the programme knob is turned

to select a different programme or

when the product is switched off.

5.21.4 Troubleshooting

Follow the steps below if you are having problem

with controlling or connection. Observe whether

the problem persists or not after the action you

have performed. Do the following if the problem

is not resolved.

• Check whether your smart device is

connected to the relevant home network.

• Restart the product application.

• Turn Bluetooth off and on through

the user control panel.

• If the connection cannot be established

with the above processes, repeat the initial

set-up settings on the washing machine.

If the problem persists, consult an

Authorised Service Agent.

6 Maintenance and cleaning

Service life of product extends and frequently

experienced problems will be reduced if it is

cleaned at regular intervals.

6.1 Cleaning the detergent drawer

Clean the detergent

drawer at regular

intervals (every 4-5

washing cycles)

as shown below

in order to prevent

accumulation of

powder detergent in

time.

1 Remove the siphon by lifting it from behind

as shown in the picture. After performing

the below mentioned cleaning procedures,

replace the siphon back to its seating

and push its front section downwards to

make sure that the locking tab engages.

INFORMATION

• If more than normal amount of water and

softener mixture remains in the softener

compartment, the siphon must be cleaned.

2. Wash the detergent drawer and the siphon

with plenty of lukewarm water in a washbasin.

In order to prevent the residues to contact

your skin, clean it with an appropriate

brush by wearing a pair of gloves.

3 Insert the drawer back into its place after

cleaning and make sure that it is seated well.

6.2 Cleaning the loading

door and the drum

For products with drum cleaning programme,

please see Operating the product - Programmes.

INFORMATION

• Repeat Drum Cleaning process in every 2

months.

• Use an detergent /anti-limescale suitable

for the washing machines.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO HTV8716XMST Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO HTV8716XMST

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info